Specifications

Service
Page 18
XG0519 - 070714
PVHFL58-300 & PVHFL510-300 Horizontal Power Vent
Step 6: Unscrew 8 screws securing the motor mounting plate.
Figure 10f.
Step 7: Remove the motor.
Figure 10g.
Step 8: Install the new motor.
Figure 10h.
Step 9: Secure motor mounting plate with supplied 8 screws & star washers.
Figure 10i.
Step 10: Secure new capacitor with supplied screw.
Figure 10j.
Step 11: Using suppled small bell connector, connect the blue wire from the
motor to the black bre wire from the power cable.
Figure 10k.