Specifications

Service
Page 19
XG0519 - 070714
Go to reinstalling either from outside or inside.
PVHFL58-300 & PVHFL510-300 Horizontal Power Vent
Step 13: Using the other supplied small bell connector, connect the brown
wire from the motor to the black wire of the capacitor.
Figure 10m.
Step 14: Secure the wiring neatly with the supplied zap straps. Check that
the power vent operates and spins counterclockwise. NOTE: When replacing
from inside you will need to reinstall the power vent and check spin from the
outside. Note: Ensure wires are secured away from moving parts
Figure 10n.
Step 12: Using the other supplied large bell connector, connect the white
bre wire from the power cable to the black wire from the capacitor and the
black wire from the motor.
Figure 10l.