Specifications

Introduction
Specications
General Information
This installation guide covers installation of the External Power Vent
System only. This system is designed to allow installation of gas replaces
that cannot be done with a standard Direct Vent gas replace installa-
tion. Only for use on R-Series, R-Series See-Through and RP-Series.
ONLY USE WITH APPROVED FIREPLACES - see replace
installation manual.
Read through the replace's installation & maintenance manual, as it
must also be adhered to.
Power Cord Harnesses:
EPVH10 - 10 foot power cord and harness
EPVH20 - 20 foot power cord and harness
EPVH30 - 30 foot power cord and harness
EPVH40 - 40 foot power cord and harness
EPVH50 - 50 foot power cord and harness
EPVH60 - 60 foot power cord and harness
EPVH70 - 70 foot power cord and harness
EPVH80 - 80 foot power cord and harness
EPVH90 - 90 foot power cord and harness
EPVH100 -100 foot power cord and harness
Before Your Begin
For vent congurations and power vent locations,
refer to replace manual.
PVHFL58-300 & PVHFL510-300 Horizontal Power Vent
Safety Alert Key
Page 2
XG0519 - 070714
Pipe Dimensions PVHFL58-300 ............5"/8"
Pipe Dimensions PVHFL510-300 ..........5"/10"
Maximum Airow: ......................... 300 CFM
Speed: .......................................... 2700 RPM
Power: ............................................Connect to replace control box
............................................ Refer to replace rating plate