Use and Care Manual

- 18 -
Cleaning
Clean grates using a wire grill brush. This should be done with each use. DO NOT use oven cleaner
or abrasive cleaners on the painted grill surfaces. Use warm soapy water on all painted surfaces.
clean grease pan, grease trough, and grease drain tube occasionally. A spatula can be used to scrape
excess grease and a grill brush to brush clean. Do not allow grease to build up on the grease tray or
in the grease trough as this can cause flare-ups inside the grill. Make sure not to obstruct the
flow of grease off of the tray and into the grease rough. Make sure not to block the airflow to the
temperature sensor on the left side of the grill.
8. Button Function Description
This is the power button of the device (Power indication function included, The
indication is off when the device is off， The indication of blue light is on when the
device is on
This button is the unit switch button. The Fahrenheit temperature is displayed by default.
When it is on, it can display Celsius temperature, and it can be switched back to Fahrenheit.
The corresponding icon on the LCD will automatically switch.
This button is manual pellet feeding button. It will continually feed the pellet when you keep
Pressing the button. And will change to program feeding after releasing the button
Left is for PROBE 1 and right for PROBE 2