User Manual

10
www.DeubaXXL.de
grounded.
Do not expose power tools to rain or wet
Water entering a power tool will
increase the risk of electric shock.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
and moving parts. Damaged or entangled cords
increase the risk of electric shock.
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Personal safety
Stay alert, watch what you are doing and use
personal injury.
such as dust mask, non-skid safety shoes, hard
up or carrying the tool. Carrying power tools
power tools that have the switch on invites
accidents.
turning the power tool on. A wrench or a key
may result in personal injury.
Dress properly. Do not wear loose clothing
or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes,
jewellery or long hair can be caught in moving
parts.
these are connected and properly used. Use of
Power tool use and care
Do not force the power tool. Use the correct
The correct
the rate for which it was designed.
Do not use the power tool if the switch
Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing power tools. Such
Store idle power tools out of the reach of
children and do not allow persons unfamiliar
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
power tool repaired before use.
Many accidents are caused by poorly
maintained power tools.
11
www.DeubaXXL.de
Properly
edges are less likely to bind and are easier to
control.
Use the power tool, accessories and tool bits
and the work to be performed.
from those intended could result in a hazardous
Service
parts. This will ensure that the safety of the
power tool is maintained.
Do not use the power tool for explosive
Power tools produce sparks which could ignite
developing vapours.
In case the power tool should fall into
immediately and have the power tool checked
Material that
has penetrated the power tool can cause
damage and lead to an electric shock.
the insulated gripping surfaces while working
. The machine is more securely guided
with both hands. Loss of control can cause
personal injury.
Hold power tool by insulated gripping surfaces,
or its own cord.
a “live” wire may make exposed metal parts
of the power tool “live” and could give the
operator an electric shock.
the tool insert jams. Be prepared for high
The
tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
Do not mix food. Power tools and their
accessories are not designed for processing
food.
Keep the cord away from the working area. The
The mixing container must be suitable for
mixing and must stand securely. A container
that is not properly secured may move
uncontrolled.
Ensure that no liquid splashes against the
housing of the power tool. Liquid that has
penetrated the power tool can cause damage
and lead to electric shock.
Material Safety Data Sheets (MSDS) of the
material to be mixed. Material to be mixed may
be harmful.
switch. This will prevent the power tool from
Do not use the power tool in a stand.
Electrie Paint Mixer Safety Warning and user
ELECTRIE PAINT MIXER