User Manual

08
Instructions
SelectPreset
PressSAVEbuttontoscrollthroughthe14presetslots;Oryoucanpresstwofootswitches
simultaneouslytoenterpresetselectmode,theLEDofbothfootswitches,theLEDofSAVE
buttonwillblinkinRED.Inthismode,pressleft/rightfootswitchtoscrollup/downthe14
presets.
Thepresetselectmodewillexitandbebacktonormalmodeifidleformorethan3
seconds.Innormalmode,theLEDofbothfootswitchesandSAVEbuttonwillstayon.
Toneadjustmentforleft/rightoutput
Eachpresetcanstorethecabsimmodels,parameterstheofleftoutputandrightoutput
individually.PresstheleftfootswitchtoswitchtheA(left)outputandB(right)output.
ThecoloroftheLEDbuttonindicatesthecurrentlyselectedoutput.Bluemeanstheleft
outputisselectedwhileredmeanstherightoutputisselected.Thecontrollable
parametersincludeLEVEL,TYPE,LATENCY,LOWCUT,HIGHCUTandCAB.
Inthenormalfootswitchmode,pressrightfootswitchtoturnon/offthecabsimof
left/rightoutput.
ThePRESETLEDwillblinkwhenpresetparameterchangesandhavenotbeensaved.