User Manual

SavePresets

PressandholdtheSAVEbuttonfor2secondstosavethecurrentlyeditedparameters.The

buttonLEDwillblinktoconfirmsavingiscomplete.

FactoryReset

UnplugthepowercordthenpressandholdtheSAVEbuttonwhileplugginginthepowercord

topowerontheunit.ThePRESETLEDwillstarttoblink.Releasethebuttonandwaitforthe

LEDtostartblinkingtoconfirmtheresetwassuccessful.Thisoperationcanbecancelledby

poweringoffthepedalbeforereleasingtheSAVEbutton.

Notice:Factoryresetwillclearalluserfiles,includingthethird-partyimpulseresponse

files.