User Manual

ManualsBrandsMooer ManualsGuitar EffectsGE300 Lite - MULTI-EFFECT PEDALBOARD FOR ELECTRIC GUITAR

Owner's manual

Sec

Summary of content (85 pages)

PAGE 1
Owner's manual Sec
PAGE 2
Contents PRECAUTIONS-------------------------------------------------------------------------------------------------------------------- 01 Features---------------------------------------------------------------------------------------------------------------------------- 02 Quick Tour--------------------------------------------------------------------------------------------------------------------- 03-15 Top Panel------------------------------------------------------------------------------------
PAGE 3
OUTPUT------------------------------------------------------------------------------------------------------------------------- 28 USB AUDIO------------------------------------------------------------------------------------------------------------------ 29-30 MIDI------------------------------------------------------------------------------------------------------------------------- 31-37 FS MODE--------------------------------------------------------------------------
PAGE 4
PRECAUTIONS *Please read carefully before proceeding* Power Supply Please connect the designated AC adapter to an AC outlet of the correct voltage. Please be sure to use only an AC adapter which supplies 9V DC 2A , center negative. Unplug the AC power adapter when not in use or during electrical storms. Highly recommend to use the original power supply.
PAGE 5
Features ● High-quality AMP models that utilize MOOER's non-linear digital amp modelling technology and IR-based speaker cab models to emulate the same dynamics and feel of a real tube amp. ● TONE CAPTURE allows you to sample and capture your real-life ampliﬁer, stompbox, guitar, or cabinet to create brand new digital sound models. ● 108 preamp models captured from real-life ampliﬁers, 164 high-quality eﬀects, 43 IR-based factory speaker cab models.
PAGE 6
Quick Tour Top Panel 09 10 03
PAGE 7
01 LCD screen 5-inch 854*480 LCD chromatic monitor displays the GUI. 02 << >> Scroll parameter pages left and right in the GUI. 03 SELECT Rotate / Press to make selections within the GUI. 04 Knob 1 ‒ 5 Adjust individual parameters in the GUI. 05 SCREEN MENUS DISPLAY: Toggles between FOOTSWITCH VIEW and SIGNAL CHAIN on the GUI home-screen. Press to return home from other screens. GLB-EQ: Global EQ settings menu. CTRL: Conﬁgure, assign， and customize footswitch settings.
PAGE 8
09 EFFECT BLOCK Press to enter eﬀect block editing screen. Press to toggle eﬀect block on/oﬀ. LED displays the on/oﬀ status of the eﬀect block. 10 CTRL 1 ‒ 3 & A, B, C GE300 LITE oﬀers three diﬀerent footswitch modes. (Refer to CTRL and FS mode section) CTRL3 FS MODE 1: Assign functions via CTRL button. FS MODE 2: Assign functions via CTRL button/selected preset from top column. FS MODE 3: Assign functions via selected preset from two banks. A , B , C FS MODE 1: Select corresponding preset A , B , or C.
PAGE 9
Back Panel 01 02 04 03 06 05 08 07 10 09 01 Guitar/Line Switch Switch input level between guitar and line. 02 AUX IN 1/8 " stereo jack to connect external media devices for audio playback. 03 1/4'' INPUT Instrument input 04 EXP1/EXP2 ¼ " stereo jack/external expression pedal input. Can be set as AMP CTRL to switch between channels of connected ampliﬁer.
PAGE 10
05 SEND/RETURN Mono eﬀects loop SEND: ¼"mono jack output RETURN:¼"mono jack input The SEND/RETURN can be used to connect an external eﬀects pedal or to setup the 4-cable method connection. 06 OUTPUT 2 x ¼"mono jack L = MONO output L + R = STEREO output 07 PHONES Dedicated headphone output ¼"stereo jack 08 XLR OUT 2 x Balanced XLR output with Ground/Lift switch. L = MONO output L + R = STEREO output 09 GND/LIFT Switch Grounding switch of XLR balanced output.
PAGE 11
Recommended Setup Connecting to FRFR (Full range, ﬂat response) speaker cabinets: Turn on AMP and CAB SIM Blocks. AUDIO INTERFACE/STUDIO MONITOR STAGE MONITOR OR PA SYSTEM HEADSET GUITAR Connecting to a power amp or FX Loop: Turn on AMP Block. Try turning on/oﬀ tube setting to achieve your desired tone. Connecting to Guitar Amplifer + FRFR Device: Turn on AMP and CAB SIM blocks. CAB SIM block should be placed at the end of the eﬀects chain.
PAGE 12
4-Cable Method: Turn on FX LOOP block. Turn oﬀ AMP and CAB blocks. Set FX Loop to"Serial". Place stompboxes such as wah, compression, pre-EQ, octave, etc., before SEND. Modulation, Delay, reverb eﬀects are recommended to be placed after RETURN. FRFR DEVICE CONNECT RETURN OF AMP / POWER AMPLIFIER GUITAR Connecting to a Guitar Ampliﬁer or traditional FX LOOP: We recommend turning oﬀ AMP and CAB blocks.
PAGE 13
Start 1. Connect the GE300 Lite with your preferred setup. 2. Turn the MASTER volume control all the way down. 3. Plug in the power supply and switch on the GE300 LITE. 4. Rotate the MASTER volume control slowly until reaching a comfortable level. XLR MASTER OUTPUT& MASTER Home Display The GE300 Lite has 2 main home displays. FOOTSWITCH DISPLAY and SIGNAL CHAIN DISPLAY. Press the DISPLAY button at any time to return home. Press the DISPLAY button again to toggle between the 2 home displays.
PAGE 14
Signal Chain Display The GE300 LITE has a customizable signal chain. From the HOME DISPLAY you can edit the order of your eﬀects blocks and rearrange the SEND/RETURN, XLR OUT, and master OUTPUT. INPUT and OUTPUT LEVEL Displays the current signal level being received in the INPUT, main output, XLR output and headphone output. TAP TEMPO BPM, CPU USAGE and Trail Display PRESET NUMBER + PRESET NAME The displayed number is the bank number.
PAGE 15
Select Preset The GE300 Lite has 13 eﬀects blocks. The order of eﬀects chain, the type of eﬀects, the value of eﬀects, expression pedal control, and CTRL footswitch can all be stored into diﬀerent preset patches for recalling. The GE300 Lite has 85 banks, each with 3 preset patches for 255 preset slots total. Preset Bank Number 16A Preset (Each preset bank has three presets slots A, B, C) Press ▲▼to switch between diﬀerent presets. The screen will show the number and name of the current bank.
PAGE 16
Preset Editing 1. Eﬀect Block ON/OFF ON: When the eﬀect block is oﬀ (The LED button is oﬀ), press relevant eﬀect block LED button to turn on (The LED button is on). OFF: When the eﬀect is on (The LED button is on), press the eﬀect block LED button to select it and then press a second time to turn oﬀ (The LED button is oﬀ). Notice: If an eﬀect block is on, press twice to quickly turn it oﬀ. 2. Value Editing A. Normal Aadjustment ● Press the desired eﬀect block button to enter an eﬀect page.
PAGE 17
B. Eﬀect chain display adjustment ● Press DISPLAY to enter eﬀect chain display. ● Rotate SELECT to navigate to the desired eﬀect. ● Rotate knobs 1-5 to adjust the parameters shown right under the eﬀect chain. ● More parameters can be accessed by <> page scroll button. Waveform 1 Sin Pitch 1 -12.0 Attack 1 50 Level 1 50 Filter oﬀ 68% TRAIL BPM 114.
PAGE 18
Saving Preset You can save the presets after you ﬁnish editing. Below is the saving procedure: 1. Press SAVE to enter saving menu. 2. Rotate SELECT to select a preset slot in which to save. 3. Press SELECT to access preset name editing. 4. Utilize knobs 1-5 to select the desired character You can edit 5 characters at a time. Press SELECT to switch to next 5 character for editing. 5. Press SAVE again to conﬁrm saving. Pressing any other button before pressing SAVE will cancel the saving process.
PAGE 19
TUNER 1. Press A&B simultaneously to access the TUNER. 2. Play the guitar string and the display will show the name and pitch of the note. 3. Tune your guitar to match the pitch. 4. Rotate knob 1 to switch between MUTE and BYPASS mode. 5. Rotate knob 2 to calibrate the tuning frequency from 435Hz-445Hz. 6. Press any footswitch except for BANK UP and BANK DOWN to exit the TUNER. TUNER G MUTE A=440Hz 1 2 Notice: You can set the CTRL footswitch to the TUNER function. Please refer to CTRL section.
PAGE 20
LOOPER The GE300 Lite has a fully integrated loop station with up to 30 seconds of loop time. Press footswitch B + C simultaneously to enter/exit the LOOPER. INPUT OUTPUT XLROUT Record display bar. Showing the recording time in seconds. BPM 120.0 50% TRAIL EXP2: FX B Gain Depth LOOPER 1 REC VOL: 50 UNDO REC VOL REC VOL. Adjust the record input volume using control knob 1. EXP1: DS//OD OFF REC DUB PLAY TIME 6.
PAGE 21
GLB-EQ GLB-EQ is the global equalization setting for the ¼” (6.35mm) output, XLR output and headphone output. ● Press GLB-EQ to access Global-EQ ● Rotate and press SELECT to navigate to the desired parameters, utilize knob 2-5 to adjust. ● Rotate knob 1 to turn on/oﬀ of global-EQ. The LED button will indicate the On/Oﬀ.
PAGE 22
FX LOOP G 300 LITE has built-in FX LOOP meeting demands from diﬀerent situations. E 1. For external stompboxes ● You can simply connect your own stompboxes into the FX LOOP as the diagram shows. GUITAR INPUT OUTPUT XLROUT BPM 120.0 50% TRAIL OFF EXP1: DS/OD Gain OUTPUT XLROUT EXP2:FX B Depth BPM 120.
PAGE 23
● Press FX LOOP button to turn on FX LOOP. The FX LOOP can be set to SERIAL and PARALLEL mode.
PAGE 24
2. 4-cable method The setting of 4-cable method is mentioned in the recommended setting section. See the detailed information in the picture below. AMP INPUT FX LOOP RETURN FX LOOP SEND GUITAR Method A Separate the eﬀect chain in to two parts via the FX LOOP. The eﬀects in front of SEND are connected with the INPUT of the ampliﬁer while the eﬀects after the RETURN connected with the SEND of ampliﬁer directly.
PAGE 25
GE 300 LITE SEND to INPUT of ampliﬁer COMP GUITAR REVERB WAH DELAY DS/OD FX A FX B GE300 LITE RETURN to the SEND of ampliﬁer NS EQ GE 300 LITE OUTPUT to the RETURN of ampliﬁer COMP WAH FX A REVERB DS/OD These eﬀects are in front of INPUT of ampliﬁer DELAY FX B EQ NS These eﬀects are places between SEND and RETURN of ampliﬁer. Notice: For avoiding misunderstanding, picture above hides the eﬀect blocks that will not used in this method, for example, AMP, CAB, TONE CAPTURE.
PAGE 26
Method B Utilizing 4-cable method to switch between the GE300 Lite eﬀect chain and the external eﬀect chain. For example, you can switch between the preamp model in the GE300 Lite and the preamp of an external real-life ampliﬁer. ● Set the 4-cable method as the diagram shows above. ● Press FX LOOP button to enter FX LOOP page and turn it on. Set FX LOOP to SERIAL mode. ● Turn on the eﬀects that you wish to use. Set the SEND right in front of the amp model, connecting to the INPUT of amp.
PAGE 27
Expression pedal The GE300 Lite has two ports (EXP 1 & EXP 2) for accessing external expression pedals. Press EXP button to enter expression pedal menu. Select EXP 1 or EXP 2 to set up. EXP EXP EXT1 CTRL OFF Function EXP Merge EXT CTRL: Set the CTRL footswitch to control the channel switching of external real-life ampliﬁer. (Refer to the CTRL-EXT CTRL section) Function: Select the parameter controlled by expression pedal. Calibrate: Calibration expression pedal.
PAGE 28
Function ● Select Function in EXP1/EXP2 menu via rotate and press SELECT. ● Rotate SELECT to select an eﬀect to control. Rotate knob 1 to select a parameter. ● Press SELECT to conﬁrm. Then you can press expression pedal to activate it and control the parameter of the eﬀect.
PAGE 29
CTRL The GE300 Lite can access editing control footswitches. The number of the control footswitches depends on the current FS mode (Refer to FS MODE section for detailed information). Setting Procedure ● In FS mode 1, three control footswitches can be deﬁned. ● In FS mode 2 and 3, six control footswitches can be deﬁned. ● FS mode can be set in the SYSTEM-FS MODE menu.
PAGE 30
System Setting Press SYSTEM to enter the system setting menu. Rotate SELECT to navigate to desired parameter. SYSTEM B3.0.3 INPUT OUTPUT USB AUDIO MIDI FS COLOR FS MODE TAP SCREEN PATA PREF RESET INPUT Global input signal level can be adjusted from INPUT. ● The INPUT LEVEL can be accessed by rotating knob 1. ● INPUT LEVEL ranges from -∞ to +6dB. ● The default setting of GE300 LITE INPUT LEVEL is 0. (No eﬀect to the original signal).
PAGE 31
OUTPUT The level of the ¼" output, headphone output, and XLR output each have independent output controls. Knob 1 for Output Level, knob 2 for Output Mode, and knob 3 for Pan. B3.0.1 OUTPUT 1: Headphoe & Output Parameter 1 2 3 100 Effect/Effect Center Level Output Mode Pan Explanation Value Level Adjust the output volume trim. 100 is the default setting. Reducing this number will attenuate the output signal.
PAGE 32
USB AUDIO G E300 Lite supports 24bit, 44.1kHz low-latency USB recording via DAW in Windows and Mac. Windows users need to download and install ASIO driver for the GE300 Lite from the MOOER website. Mac users can use the GE300 Lite for recording without installing the extra driver. B3.0.1 USB AUDIO AUDIO MODE Normal RIGHT OUT Effect LEFT OUT Effect 1 2 3 100 100 50 Rec Vol Play Vol Direct/Play back The parameter can be accessed by rotating the SELECT knob or knob 1, 2, 3. 1.
PAGE 33
3. SETTING PROCEDURE (1) Normal mode Computer Rec Vol Play Vol MIX DSP INPUT (Direct / Playback) OUTPUT ● Set the AUDIO MODE to Normal. ● Open the DAW software and set "MOOER USB AUDIO"as the driver. Set the output as the "Analogue1/Anlogue2" of GE300 LITE. ● Set the Eﬀect/Dry of the left and right output as you wish. ● Create a new project and create a new track. Play the guitar and check the wave of sound. If the wave is distorted, please decrease the Rec Vol.
PAGE 34
MIDI The GE300 LITE can be set to MIDI IN or MIDI OUT. The detailed MIDI mapping settings can be set from the MIDI SETTING menu. V1.0.0 MIDI MIDI IN MIDI OUT 1.MIDI IN MIDI IN SYNC CLOCK: MIDI Clock on/oﬀ. A clock signal that is broadcast via MIDI to ensure that several MIDI-enabled devices stay in synchronization. CHANNEL 16 SYNC MIDI CLOCK ON MIDI CHANNEL: MIDI IN channel setting. From 1 to16 channel, or OMNI. CC REFERENCE: MIDI CC list. Control Change messages.
PAGE 35
2. MIDI OUT MIDI V1.0.0 Channel: MIDI OUT channel setting. From channel 1 to 16. CHANNEL SEND MIDI CLOCK PC MAPPING: PC mapping list. Used for selecting presets or patches. 16 ON SYNC CLOCK: MIDI Clock on/oﬀ. A clock signal that is broadcast via MIDI to ensure that several MIDI-enabled devices stay in synchronization. PC MAPPING MIDI V1.0.
PAGE 36
Please refer to the list below for setting MIDI control.
PAGE 37
When controlling the GE300 LITE with a MIDI IN signal, the preset number of the PC code can be customized by the user. PC# Program Change List RX PC# Program Change List RX 1A 1B 0.0 0.1 43C 44A 1.0 11A 0.30 53C 1.30 1.1 11B 0.31 54A 1.31 11C 0.32 54B 1.32 12A 0.33 54C 1.33 12B 0.34 55A 1.34 12C 0.35 55B 1.35 1C 0.2 44B 1.2 2A 0.3 44C 1.3 2B 0.4 45A 1.4 2C 0.5 45B 1.5 13A 0.36 55C 1.36 3A 0.6 45C 1.6 13B 0.37 56A 1.37 3B 0.7 46A 1.7 13C 0.
PAGE 38
When controlling the GE300 LITE with a MIDI IN signal, the preset number of the PC code can be customized by the user. PC# Program Change List RX PC# Program Change List RX 22B 22C 0.64 0.65 65A 65B 1.64 32B 0.94 75A 1.94 1.65 32C 0.95 75B 1.95 33A 0.96 75C 1.96 33B 0.97 76A 1.97 33C 0.98 76B 1.98 34A 0.99 76C 1.99 23A 0.66 65C 1.66 23B 0.67 66A 1.67 23C 0.68 66B 1.68 24A 0.69 66C 1.69 34B 0.100 77A 1.100 24B 0.70 67A 1.70 34C 0.101 77B 1.101 24C 0.
PAGE 39
When controlling the GE300 LITE with a MIDI IN signal, the preset number of the PC code can be customized by the user.
PAGE 40
When controlling the GE300 LITE with a MIDI IN signal, the preset number of the PC code can be customized by the user.
PAGE 41
FS MODE The GE300 Lite has three diﬀerent footswitch modes to choose from by entering FS MODE. The GE300 LITE is set to MODE 1 as the default setting. For the control footswitch setting, please refer to the CTRL section. MODE 1 B3.0.1 FS MODE MODE 1 2 BANK CTRL 1 CTRL 2 CTRL 3 A B C Three control footswitches and three preset patches. Switch preset bank by the BANK UP/BANK DOWN footswitch. MODE 2 B3.0.
PAGE 42
MODE 3 B3.0.1 FS MODE MODE 3 2 BANK A B C A B C Six preset footswitches. Switch preset bank by using BANK UP/BANK DOWN footswitch.
PAGE 43
FS COLOR E G 300 LITE oﬀers 7 colors of footswitch LEDs. FS color can be customized by users in the FS COLOR menu. Users can customize the LED colors in preset mode and looper mode by rotating the SELECT knob and knobs 1-4. You can preview the color in this menu.
PAGE 44
TAP TAP TEMPO can be set in the TAP menu. There are two mode of TAP TEMPO, Global and Preset. V1.1.0 SYSTEM Preset Global PRESET- The tap tempo is determined by the speciﬁc preset. GLOBAL- Master tap tempo that overrides preset settings for tap tempo. Notes: The BPM (Beat Per Minute) will show on the main screen. The Sub-Division of modulation or delay can be controlled by the BPM of tap tempo. OUTPUT XLROUT BPM 120.0 INPUT 50% There are two ways to edit BPM: 1.
PAGE 45
SCREEN SCREEN 1 20 LOGHT Rotate control knob 1 to adjust the display screen brightness PARA PREF The GE300 LITE oﬀers two parameter adjustment modes. Users can access them in the PARA PREF menu. B3.0.3 PARA PREF Parameter Preferences Default Maintain Default: When Switch Effect To Another One From The Same Effect Block, The Parameter Of Effect Will Restored To The Default Setting.
PAGE 46
RESET V1.0.0 SYSTEM Reset The G 300LITE and Restore All parameters E Yes No Select YES to RESET GE300 LITE back to default ﬁrmware settings. Select NO to cancel and exit the menu. Notice: 1. It is recommended to backup your presets via editor software before resetting. 2. Please do not power oﬀ your GE300 LITE during reset to avoid any unexpected issues.
PAGE 47
Eﬀect Block COMP G 300 LITE comes complete with 10 diﬀerent models of compressor, spanning from super simple 2 knob stompboxes to advanced 3-band studio compressors. E Compressor parameters Parameter Explanation Value Output Output level of eﬀect.
PAGE 48
WAH G 300 LITE has 10 diﬀerent models of wah, including classic and modern wah pedals, completely customizable rack style units, talk wahs, modulation and E envelope controlled auto wahs.
PAGE 49
Auto Wah parameters Auto Wah is an automatic sweeping band pass ﬁlter. The sweep is controlled by a modulating LFO.
PAGE 50
Touch Wah parameters Touch wah is an automatic sweeping band pass ﬁlter.The sweep is controlled by an envelope follower that reacts to the dynamics of your instrument. Parameter Explanation Value Attack Speed of the envelope. 100 is the fastest.
PAGE 51
FXA / FXB FXA and FXB eﬀect blocks have multiple diﬀerent eﬀect types including Modulation, EQ, Pitch, Delay, Filters. FXA also has extra overdrives and boosters for stacking with the OD/DS module. FXA has 40 eﬀects, FXB has 35 eﬀects.
PAGE 52
Parameter Explanation Value Tone Adjusts the tone of modulation 0 - 100 Depth Adjusts the depth of modulation. 0 - 100 Moves the frequency response pattern through a six-octave or twelve-octave range.
PAGE 53
Parameter Explanation Value Mix Sets the proportion of mix between the original (dry) and 'eﬀected' (wet) signals. 0 is total dry signal, -100cent ‒ 100cent Set the pitch shift value. Pitch 0 - 100 100 is total wet signal. (Detune)-12.0 ‒ 12.
PAGE 54
DS/OD E G 300 LITE has 31 diﬀerent "gain based" Stompbox eﬀects including distortions, overdrives, fuzz's and boosters. Each one has been fastidiously modelled after a real-life pedal using similar techniques we employ to create our digital ampliﬁer models.
PAGE 55
Numbers Name Explanation 21 Two Stones 212 Based on Two Rock® 212 Cabinet 22 Cardeﬀ 112 Based on Two Rock® 112 Cabinet 23 EV 5050 412 Based on EVH® 5150 412 Cabinet 24 HT 412 Based on Blackstar ® HTV 412 Cabinet 25 Gas Station 412 Based on Diezel® Hagen 412 Cabinet 26 Blueno 212 Based on Bruno® 212 Football Cabinet 27 Custom 212 Based on Custom Audio® 212
PAGE 56
Parameter Explanation Value Sm57, SM7A, U47, U87, M143, M147, KM184, NT1, NT2, NTV, MD421, Mic Select which microphone type MD441, E609, E835, MXL2001, MXL2003, C3000, C4000B, C414, D112, C535.
PAGE 57
List of microphone Numbers Name Explanation 1 Sm57 Based on Shure® SM57 2 SM7A Based on Shure® SM7A 3 U47 Based on Neumann® U47 4 U87 Based on Neumann® U87 5 M143 Based on Neumann® Km143 6 M147 Based on Neumann® M147 7 Km184 Based on Neumann® Km184 8 Nt1 Based on Rode® Nt1 9 Nt2 Based on Rode® Nt2 10 NTV Based on Rode® NTV 11 Md421 Based on S
PAGE 58
IR E G 300LITE CAB module also has 20 empty IR slots for you to load in your own third-party Impulse Responses via USB using the computer software. INPUT OUTPUT XLROUT BPM 120.0 56% EXP1: REVERB Decay EXP2:SYNTH Pitch 1 47：Mooer Studio 11 1 BLUE 2 BLUE 3 BLUE 4 BLUE 5 BLUE UNDO REVERSE 1/2 SPEED EXIT EXIT When a third-party IR ﬁle is used for your cab model, you will lose the microphone parameters. You can adjust High/Low cut, Early Reﬂection, Output, and sampling points.
PAGE 59
NS E G 300 LITE has 3 diﬀerent noise gate models which are ideal for getting rid of unwanted noise or using as a hard gate eﬀect for tight, high-gain rhythm playing. Noise Killer: Based on MOOER Micro Noise Killer easy tweaking noise gate eﬀect. Hard noise gate with maximum dampening Inter Reducer: Intelligent background noise suppressor with automatic attack, release, and dampening. It can recognize white noise from regular signal and reduce the white noise automatically.
PAGE 60
TONE CAP The GE300 LITE is armed with an incredibly useful tool named TONE CAPTURE. Tone Capture is an intelligent learning and comparison engine that can be used to create your very own digital models by sampling real-life equipment. Tone capture has 3 diﬀerent modes: GUIT Instantly transform the sound of your guitar using samples you've created with Tone Capture GUIT mode. Sample and carry all your favorite guitars with you wherever you go.
PAGE 61
GUITAR STEP 1 Press the DISPLAY button until the signal chain screen is displayed and ensure that the TONE CAP eﬀect block is the ﬁrst eﬀect block in the chain. Make sure SYNTH is turned oﬀ and TONE CAP is turned on. INPUT OUTPUT XLROUT 50% TRAIL BPM 120.0 OFF EXP1: DS/OD Gain EXP2:FX B Depth 01A US Deluxe SYNTH TONE CAP VOL REVERB COMP NS DELAY FX B Mid 50 Low 50 FX A WAH CAB EQ Hiah 50 DS/OD AMP Hiah 50 STEP 2 Navigate to an empty preset (NULL).
PAGE 62
STEP 3 Connect the Guitar you wish to sample to the GE300LITE's INPUT This is known as the TARGET guitar. Press Bank down footswitch ▼ (target) to begin the capture process and play the guitar until the countdown reaches 100%. For best results, we recommend playing the guitar strongly with an open chord ﬁrst then playing across the full range of the instrument as possible. INPUT OUTPUT XLROUT BPM 150.
PAGE 63
STEP 5 Press footswitch B to activate the Tone Capture. Use control knobs 1-4 to adjust EQ and output volume to dial in the Tone Capture to your liking. INPUT OUTPUT XLROUT BPM 150.0 77% TRAIL OFF Learning: Guit EXP1:AMP Master EXP2:AMP Gain 02:Null 1 3 2 4 0dB 50 50 50 Low Mid High ▼ A Target Source capture capture Output B 21% C Active STEP 6 Tone Capture saves automatically under default name USER.
PAGE 64
AMP&STOMP AMP&STOMP mode can be used to sample your favorite stompbox or ampliﬁer. This kind of Tone Capture can then be applied to an existing amp or stompbox model within a preset to transform it into your sample. Stompbox eﬀects like distortion, overdive, and boost will work very well with Tone Capture. You cannot sample stompbox eﬀects like delay, reverb or modulation with Tone Capture. STEP 1 Decide if you will capture a Stompbox or an amp.
PAGE 65
STEP 2 Press the DISPLAY button until the signal chain screen is displayed and ensure that the TONE CAP eﬀect block is after the DS/OD eﬀect block if you will capture a Stompbox or after the AMP eﬀect block if are capturing an ampliﬁer or preamp pedal. For best results, make sure all other eﬀects blocks (other than CAB) are oﬀ. INPUT OUTPUT XLROUT 53% TRAIL BPM 120.
PAGE 66
If you need the CAB module to monitor, please turn on the CAB and adjust the send/return before the CAB. INPUT OUTPUT XLROUT 53% TRAIL BPM 120.0 OFF EXP1: COMP Sensitivity EXP2: COMP Sensitivity 66A Empty COMP REVERB FX A WAH DELAY FX B DS/OD NS EQ Mid 50 Low 50 AMP Hiah 50 TONE CAP CAB Level 0dB STEP 3 Navigate to an empty preset (NULL). Select Amp&Stomp mode (Learning :Amp&Stomp). INPUT OUTPUT XLROUT BPM 150.
PAGE 67
STEP 4 Press BANK DOWN▼to monitor the Stompbox or Amp you wish to sample. This is known as the TARGET. Press footswitch A to monitor the digital Stompbox or Amp in GE300 LITE. This is known as the SOURCE. INPUT OUTPUT XLROUT BPM 150.
PAGE 68
STEP 5 Press footswitch B to begin the capture process and play the guitar until the countdown reaches 100%. For the best result, we recommend playing the guitar Strongly with an open chord ﬁrst, then playing all the note in your guitar as much as you can. INPUT OUTPUT XLROUT BPM 150.
PAGE 69
STEP 7 Tone Capture saves automatically under default name USER. Select the Pencil icon to enter a new name for the preset and press the SAVE button to conﬁrm INPUT OUTPUT XLROUT BPM 120.0 27% TRAIL OFF EXP1:AMP Master EXP2:AMP Gain 01 User A B C D E F G H I J K L M N O P Q R S T U V W S Y Z a b c d e f g h i j k l m n o p q r s t u v w s y z 1 2 3 4 5 6 7 8 9 0 _ Press and hold footswitch B to delete the Tone Capture preset and start again.
PAGE 70
Notice: 1. You can press and hold footswitch B to delete a Tone Capture ﬁle. 2. TONE CAPTURE can only be used with ampliﬁers that have a built-in FX LOOP. 3. It is recommended not to turn on any eﬀects during Source/Target sampling. 4. If you would like to use the internal cabinet simulator, please place the RETURN port between Tone Capture and CAB in the eﬀect chain display. 5. Please do not turn on the FX LOOP of the GE300 LITE during capturing ampliﬁer.
PAGE 71
STEP 1 Connect the GE300 LITE SEND to the power amp input. You can also connect the GE300 LITE RETURN to the output of your MIC PREAMP. Power amp IN INPUT Mic Pream IN CAB Mic Out Line out STEP 2 Press the DISPLAY button until the signal chain screen is displayed. Ensure that the signal chain has AMP > CAB > TONE CAP in that order. AMP and TONE CAP eﬀect blocks should be turned on but every other eﬀect block turned oﬀ.
PAGE 72
INPUT OUTPUT XLROUT BPM 120.0 25% TRAIL OFF EXP1: SYNTH Pitch 1 EXP2: SYNTH Pitch 1 64D Empty SYNTH VOL COMP REVERB FX B DELAY DS/OD EQ Mid 50 Bass 50 Gain 50 FX A WAH CAB AMP NS TONE CAP Treble 50 Mode Original Advanced users can get additional control over the send and return levels during the capture process by routing the send logo before the CAB eﬀect block and the return logo after the CAB eﬀect block.
PAGE 73
STEP 3 Press Bank down▼to begin the capture process and wait until the countdown reaches 100% INPUT OUTPUT XLROUT BPM 120.0 52% TRAIL OFF Learning: IR EXP1:COMP Sensitivity EXP2:COMP Sensitivity 03:Null 1 2 3 4 50 50 50 0dB Low Mid High ▼ A Capture Active Output B 31% C STEP 4 Press footswitch A to activate the new IR you have captured. Use control knobs 1-4 to adjust EQ and output volume to dial in the tone capture to your liking INPUT OUTPUT XLROUT BPM 120.
PAGE 74
STEP 5 Tone Capture saves automatically under default name USER. Select the Pencil icon to enter a new name for the preset and press the SAVE button to conﬁrm. INPUT OUTPUT XLROUT BPM 120.0 27% TRAIL OFF EXP1:SHNTH Pitch 1 EXP2:SHNTH Pitch 1 02 User A B C D E F G H I J K L M N O P Q R S T U V W S Y Z a b c d e f g h i j k l m n o p q r s t u v w s y z 1 2 3 4 5 6 7 8 9 0 _ Press and hold bank down▼to delete the tone capture preset and start again Notice： 1.
PAGE 75
EQ The EQ eﬀects block of the GE300 Lite has 8 diﬀerent algorithm models which span from simple 3 band, 5 band, 6 band and 10 band equalizers with preset frequencies to custom 3 band and fully customizable parametric EQ's for advanced users.
PAGE 76
Parameter Explanation Value Mid Hi Freq Adjust the middle high frequency range. 30Hz ~ 18000Hz High Gain Adjusts the tone for the custom high Freq range. 0 means no eﬀect.
PAGE 77
DELAY The FX LOOP of the GE300 LITE can be used to integrate your favorite external eﬀects and preamps into the GE300 LITE signal chain, or to integrate the GE300 LITE into creative and complex rig setups. We've included a few examples here but there are many possibilities.
PAGE 78
Parameter Explanation Value Level(Dual Delay/ Multi Tap Delay) Sets the independent delay level with independent level parameter. 0 - 100 Output Mode(Dual Delay/Multi Tap Delay Select between mono and stereo output. Stereo uses more CPU %.
PAGE 79
REVERB The REVERB eﬀects block of GE300 LITE has 11 diﬀerent reverb models including everything you need from vintage spring, subtle studio and immersive ambience. Parameter Explanation Value Pre Delay Delay time before the ﬁrst reﬂections can be heard.
PAGE 80
Parameter Explanation Value Mod Output (Fl-Reverb/Mod) Attack(Swell-Reverb) 0ms ‒ 200ms Adjusts the modulation mix on the reverb trails. Rate of automatic volume swell of the reverb eﬀect. 100 is the fastest.
PAGE 81
Trail Function E G 300 Lite supports Trail function with delay/reverb eﬀects. Trail function allows the carryover of delay/reverb eﬀects for a few seconds after the delay/reverb eﬀects are turned oﬀ or switched to a diﬀerent eﬀect/preset patch.
PAGE 82
MNRS ﬁle loading E G 300 lite V2.0.0 and above ﬁrmware supports loading GNR/GIR created in GE Labs or downloaded from MOOER Studio. Users can enjoy unique sample ﬁles uploaded by users from across the globe. What is MNRS® and the GNR, GIR ﬁle types? MNRS (MOOER Non-linear Response Sample) technology is developed by MOOER engineers based on their years of experience with sampling technology. Now MOOER has improved the MNRS Engine in version 2.0, with better tone quality and dynamic response.
PAGE 83
Speciﬁcations NO. of Eﬀect Blocks 13 NO. of Eﬀect Types 315 Maximum Input Level Patches 255 (Preset) A/D Conversion Format .wav 12.4 dBu Sampling Rate 44.1 kHz Input Algorithm Sampling Rate 44.
PAGE 84
Phones Output Type 1/4" unbalanced stereo audio jack Impedance 16 ohm Maximum Output Level 13 dBu D/A Conversion Dynamic 114 dB Frequency 20Hz ‒ 20kHz, +0 / -1 dB MIDI MIDI IN / OUT 5 Pin Female Connector USB Type USB Type-B USB Audio USB 2.0, 2 IN 2 OUT, 44.1kHz, 24bit EXP Expression Jack Type 1/4"TRS jack X 2 Impedance 10k ‒ 100k ohm Power Supply 9V 2A Dimensions 287mmX208mmX64mm Weight 2.1 kg Accessories Power Supply, USB Cable, Quick Guide manual.
PAGE 85
www.mooeraudio.com SHENZHEN MOOER AUDIO CO. LTD 6F, Unit D, Jinghang Building, Liuxian 3rd Road, Bao’an 71 District, Shenzhen, China.