User Manual

08
Instructions
1.PresetSelect:
A.PressSAVEtoscrollthroughpresetslots1-14
B.PressboththeCH.AandCH.Bfootswitchestoenterpresetselectmode.Inthismode,
youcanpressCH.AtoscrollupthroughthepresetslotsorCH.Btoscrolldownthroughthe
presetslots.
2.ChannelSwitch
PreampModelXhas14presetslots.Eachofthemcanstore2differentchannelsettings.In
normalmode,pressCH.AorCH.Btoselectthecorrespondingchannel.Onlyonechannel
willbeactivated,andthecorrespondingfootswitchwillilluminate.Pressthefootswitchof
thecurrentlyselectedchannelagaintobypassthesignalandbothfootswitchLEDswillbe
off.
Notes:YoucanutilizethePreampModelXeditorsoftwaretosetupthechannelAand
channelB.
3.PresetEditing&Saving
Rotatetheadjustmentknobstoeditparameters.ThePresetIndicatorwillblinkwhenthe
changesofthepresetparametershavenotbeensaved.
PressandholdtheSAVEbuttontosavechanges.ThePresetIndicatorwillblinkquicklyand
thenstayonifthesaveissuccessful.
Notes:Thepresetsettingwillnotbesavedinthesituationbelow
a.Switchtoanotherpresetpatchbeforesaving.
b.Bypasscurrentlyselectedchannelbeforesaving.