LITTLE TANK D15 Modeling Mini Guitar Amplifier Head
CONTENTS Precautions Panel Instructions Main Features Operational Guidance Preset Selection Tone Setting Tone Saving Quick Recall Buttons Tuner Restore Factory Setting FX Loop Aux In and Bluetooth Connections Effects Explanation Specifications Troubleshooting Patch List 01 02 03 04 05 06 09 09 10 10 11 11 12 13 16 16 17
Precautions Please read carefully before proceeding Ower Supply： Please connect the designated AC adapter to an AC outlet of the correct voltage. Please be sure to use only an AC adapter which supplies 18V DC, , 1200mA, center negative. Unplug the AC power adapter when not in use or during electrical storms. Connections： Always turn off the power of the D15 and all other equipment before connecting or disconnecting. This will help prevent malfunction and damage to any of the devices.
Panel Instructions 1 4 5 6 7 2 3 8 9 10 18 11 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 12 13 14 15 16 17 LCD Display: Displays the User Interface and provides all information for presets and parameters PLAY: Accesses preset page A、B、C、D:Quickly recalls 4 of your favorite presets TUNER: Accesses the Tuning function page SAVE：Access to saving custom user presets AMP：Accesses the amp model and amplifier parameters page CAB：Accesses the speaker cabinet simulation page MOD：Accesses
DC IN 18V 1.2A 19 24 19 20 21 22 23 24 23 22 21 20 SPEAKER OUT: Connects to an external speaker or speaker load（Please connect 4ohm or over） SEND：Connect this to the input of external time based or modulation effects.
Operational Guidance 01 Power Connect the supplied power adaptor to the DC-IN jack located on the rear side. 18V, 1200mA, ）Connect a speaker load of at least 4Ohm to the speaker out. Connect your instrument to the Input jack and power the D-15 on using the ON/OFF switch. DC IN 18V 1.
Preset Selection 01 Selecting Presets Power on the D15 or press the play button to access the preset page. the LCD Display will indicate the information of the current preset. Rotate the Value control to change the current selected preset. 3 1 4 2 5 1. Preset number 5. Modulation model 6 2. Preset name 6. Delay model 7 4. Cab model 3. Amp model 7. Reverb model Note:1. When changing preset the AMP, CAB and EFFECTS buttons will illuminate if they are active 2.More details will be list on page 17.
Tone settings 01 AMP Editing Press the AMP button to access the Amp model page.Press again to active the Amp model. Here you can see the amp model which is selected and the levels of all various amp settings. Rotate the VALUE control knob to change the amp model. Pressing the VALUE control knob will select different individual parameters which can be easily adjusted by then rotating the VALUE control.Press the Amp button to turn off the Amp model while the Amp model is activating.
02 CAB Editing Press the CAB button to access the speaker cabinet simulation page. Rotate the VALUE control knob to select a different speaker cabinet 03 MOD Editing Press the MOD button to access the Modulation effect page. Rotating the VALUE control knob will select different types of Modulation effects. Pressing the VALUE control will select the various parameters which can then be adjusted by rotating the VALUE control knob.
04 DLY Editing Press the DLY button to access the Delay effects page. Rotating the VALUE control knob will select different types of Delay effects. Pressing the VALUE control will select the various parameters which can then be adjusted by rotating the VALUE control knob. Pressing the DLY button at any time while on this page will return the parameter selection back to the delay type selector. 05 REV Editing Press the REV button to access the Reverb effects page.
Tone saving Press the SAVE button at any time to save your current tone and access the preset saving function page. Rotate the VALUE control knob to select the preset number where you would like to save your tone. Press the VALUE control to switch between the preset number select and the name edit parameters. Rotate the VALUE control knob to scroll through letters and press the VALUE control to select the letter and move to the next character.
10
FX LOOP The D15 comes complete with a serial effects loop for easy integration with your favorite external effects. DC IN 18V 1.2A Connect the SEND from the D15 to the input of your external effects. Connect the output of your external effects to the RETURN of the D15. It is recommended to only use time based effects, modulations and reverbs in the effects loop for best results. AUX IN and Bluetooth The D-15 has two methods of connecting to external devices for the means of audio playback.
Connections DC IN 18V 1.
Effect Explanation AMP Specifications NO. Name 1 AMP OFF 2 Uk30 3 Uk800 CL 4 TRIPLE Based on MESA triple rectifier 5 MK IV Based on MESA MK IV 6 F.
CAB NO.
NO. Name MOD Specifications 1 OFF 2 3 4 CHORUS OFF This effect creates a shining dimensional sound. FLANGER This effect produces an undulating and floating sound. 5 TREMOLO 6 VIBRATO 7 FILTER 8 9 PHASER This effect creates a pulsing-like sound. This effect periodically influences the volume of the signal. This effect produces an intense vibrato sound. This effect produces a sweeping filter sound. RING MOD This effect produces a sound which sounds like a ring bell.
Specifications No. of Effect Modules: No. of EffectTypes: Preset Patch Memory: Input Jack: Speaker Ou t : Se n d /Return: e Headphoneout: Power requirements: Watt: Dimensions: Weight: Accessories: Bluetooth: 5 modules 65 Effect types 40 patches 1/4” mono audio jack 1/4” mono audio jack,connect over 4ohm speaker 1/4 ”mono audio jack 1/8” stereo audio jack AC adapter 18V DC,1200mA, 15watt 186mm X 96.5mm X 75.8mm 0.
Patch List No. Name of preset No.
MOOER AUDIO CO.,LTD Shenzhen, China www.mooeraudio.
