User Manual

11
DrumMachineBPM:RotateVALUEtoSPEED.PressVALUEtoenterBPM
menu(TheLEDofSPEEDwillturngreen).RotatetheVALUEtoadjustthe
BPM.
3.SYNC(Drummachine&Looper)
SYNCfunctionallowsuseoftheDrumMachineandLoopersimultaneously.
Beforerecordingbegins,therewillbeaCount-in.Drummachineand
Loopercanbeusedseparatelyaftertherecordinghasbegun.
Procedure:RotatetheVALUEknobandnavigatetoSYNC.PressVALUEto
enterSYNCmode.theSYNCLEDwillturngreen.IftheLEDblinksandthe
screenshows“ --”,thentheSYNCisoff.iftheLEDstaysgreen,SYNCison.
RotatetheVALUEknobtoswitchon/offSYNC.
Notice:SYNCLEDwillstayyellowwheninanothermenu.
Anti-Feedback
SD50Ahastwochannels,bothwithindividualanti-feedbackfunctions.
●Activate:PresstheANTI-FBbuttontoactivatetheAnti-Feedback
function.Ifitisthefirsttimebeingactivated,itwillstartfrequency
scanningindicatedbytheblinkingLED.Otherwise,itwillrecallthe
previousscansettings.
●StartFrequencyScanning:WhentheANTI-FBisactivated,pressANTI
-FBagaintostartscanning.LEDwillstartblinking.Ifthereareprevious
scanresults,theSD50Awillkeeptheresultandaddmoredetailswith
latestscanresults.Whenthescanisdone,theLEDwillstopblinking.
●StopFrequencyScanning:Duringthescanning,pressANTI-FBbutton
topause.
●Turnoff:PressandholdtheANTI-FBbuttontoturnoffanti-feedback
function.
●Clear:WhentheANTI-FBfunctionisnotactivated,pressandholdthe
ANTI-FBbuttontoclearthescanningresult.
Notice:Anti-FeedbackfunctioncanbeaccessedviaMOOERAirSwitch.