User Manual

Specifications

Power input: 25.2V, 2A centre pin negative

Power output: 7 x 9V / 1 x 12V / 1 x 15V / 1 x 18V

Operating current: 2A total maximum output

size:135mm(D)X75mm(W)X45.6mm (H)

weight:758g

Accessories: power adapter, power cable, user manual

*Notes：Any speciﬁcation’s update will not be amended in this manual.

Part No:620010619

Charging Procedure

Ensure that the S10 power bank's power switch is in the oﬀ position

Connect the included A/C charging adapter to the power input on

the S10

Connect it to the A/C outlet

The power charging light will illuminate red to indicate that the

battery is charging and the LED display will ﬂash and show the

current capacity state of the battery. When the battery is fully

charged the L ED display will stop ﬂashing and show 100. You

can now disconnect the charging adapter.

MOOER AUDIO CO.,LTD