User Manual

36
MIDI MENU PARAMETERS
IN CHANNEL (MIDI MENU 1.1)
This determines the Subsequent 37’s MIDI Receive Channel. The choices are 1 - 16 and ALL which
puts the Subsequent 37 in Omni Mode. The default MIDI In channel is 1.
OUT CHANNEL (MIDI MENU 1.2)
This determines the Subsequent 37’s MIDI Transmit Channel. The choices are 1 - 16. The default MIDI Out
channel is 1.
SEND PGM CHG (MIDI MENU 1.3)
This determines if MIDI Program Changes are sent from the Subsequent 37 to other devices. The
choices are ON (default) and OFF.
RCV PGM CHG (MIDI MENU 1.4)
This determines if MIDI Program Changes sent from external devices are received by the
Subsequent 37. The choices are ON (default) and OFF.
IN PORTS (MIDI MENU 2.1)
This determines which MIDI ports receive MIDI data sent from other devices. The choices are OFF,
DIN, USB, or BOTH (default).
OUT PORTS (MIDI MENU 2.2)
This determines which MIDI ports transmit MIDI data sent from the Subsequent 37 to other devices.
The choices are OFF, DIN, USB, or BOTH (default).
ECHO DIN IN (MIDI MENU 2.3)
This parameter takes incoming MIDI data from the 5-pin DIN MIDI Input jack and merges it with
the data being sent from the Subsequent 37 to the selected MIDI OUT port(s). This allows the MIDI
Output (5-pin DIN and/or USB) to also act as a MIDI THRU. The choices are OFF (default), DIN, USB,
or BOTH.
ECHO USB IN (MIDI MENU 2.4)
This parameter takes incoming MIDI data from the USB PORT and merges it with the data being
sent from the Subsequent 37 to the selected MIDI OUT port(s). This allows the MIDI Output (5-pin
DIN and/ or USB) to also act as a MIDI Merge. The choices are OFF (default), DIN, USB, or BOTH.
POLY NUMBER (MIDI MENU 3.1)
This parameter species the Subsequent 37 as a single polyphonic voice for use with other
compatible Moog synthesizers. Additional synthesizers must be connected via MIDI in order to add
polyphony. No two synthesizers should be assigned to the same voice. When no other synthesizers
are connected, this value should be set to OFF.
POLY MAX (MIDI MENU 3.2)
This parameter species the number of connected voices in a poly chain. This number should not
exceed the number of connected units. The default is 3.
OUT FILTERS (MIDI MENU 3.3)
Highlight OUT FILTERS >> and press the CURSOR button to enter the OUT FILTERS sub menu.
KEYS
When set to ON (default) the keys transmit MIDI note data including channel pressure
(aftertouch) messages. When set to OFF this data is not transmitted.
WHEELS
When set to ON (default) the Pitch Bend and Mod Wheel MIDI data is transmitted. When
set to OFF this data is not transmitted.