User Manual

39
FILTER MORE PAGE (Continued)
SVF KEY TRACK (-200% to +200%)
Keyboard Tracking allows the Cutoff Frequency of the Filter to track the keyboard in the same way an
Oscillator would. In this way, higher notes on the keyboard will be ltered differently than lower notes.
At 100%, the Filter is tracking the keyboard at the same rate as the default Oscillator tracking. At 0%,
the SVF KEY TRACK parameter is effectively Off, and not tracking the keyboard at all. Below zero,
tracking has a negative (inverse) value.
LADDER KEY TRACK (-200% to 200%)
Keyboard Tracking allows the Cutoff Frequency of the Filter to track the keyboard in the same way an
Oscillator would. In this way, higher notes on the keyboard will be ltered differently than lower notes.
At 100%, the Filter is tracking the keyboard at the same rate as the default Oscillator tracking. At 0%,
the LADDER KEY TRACK parameter is effectively Off, and not tracking the keyboard at all. Below
zero, tracking has a negative (inverse) value.
TIP: Applying KEY TRACK at 100% to a self-oscillating Filter will allow it to be played from the keyboard
as an additional “oscillator.”