MP-201 Multi-Pedal Manual Firmware v2.
MP-201 Multi-Pedal Manual Firmware v2.0 Addendum This document provides information about the features and menu items which are new in MP-201 firmware version 2.0. For a more complete description of the various channel modes and functions, please read the MP201 manual in addition to this document. The MP-201 is an incredibly flexible and powerful device designed to immediately expand your creative sonic environment.
MP-201 Multi-Pedal Manual Firmware v2.0 Addendum Changes to Channel Mode GATE: Previously the most simple of MP-201 Channel Modes, the humble GATE could be either On or Off, Momentary or Latching. Now GATE Mode is perhaps the most powerful and richly-featured Channel Mode of them all. The first change you will notice is the GATE SOURCE selection. Options are FOOT SWITCH, MIDI NOTES, or PEDAL CV.
MP-201 Multi-Pedal Manual Firmware v2.0 Addendum ENV SHAPE - allows you to select from three basic Envelope Shapes: Linear, Logarithmic and Exponential. The ENV SHAPE menu has a fourth option, COMPLEX. In COMPLEX mode you can program a separate envelope shape (LIN, LOG, EXP) for the Attack, Decay and Release stages individually. Mathematics experts will note that the “Logarithmic” and “Exponential” envelope shapes do not behave exactly like those names would imply.
MP-201 Multi-Pedal Manual Firmware v2.0 Addendum Gate channels and MIDI: A Gate channel can output a MIDI CC (0-127) and/or a MIDI Note (0-127). The MIDI CC value will be 127 when the Gate is turned On, or 0 when the Gate is turned Off. If MIDINOTE OUT is enabled, the channel will output a NoteOn with Velocity 64 when the Gate is turned On, and a NoteOff (velocity 0) when the Gate is turned Off. The MIDI note number which is sent is set by MIDINOTE OUT.
MP-201 Multi-Pedal Manual Firmware v2.0 Addendum By contrast, in Constant Time mode, any glide between any two notes takes the same amount of time (as set by the GLIDE RATE parameter), no matter how far apart the notes are. This means that the actual rate of change (volts per second) is faster for wide intervals and slower for narrow intervals between notes, which creates some interesting effects.
MP-201 Multi-Pedal Manual Firmware v2.0 Addendum A tour of the new UTILITIES menu: Numbers in brackets [ ] denote top-level Utilities menu items; numbers in parentheses () denote choices within a given Utilities selection. The numbers indicate the order of the items within the menus and sub-menus. [0] VERSION NUMBER: No options here; shows the current firmware release version and build number. [1] QUAD OPTIONS: New options pertaining to the QUAD mode of operation.
MP-201 Multi-Pedal Manual Firmware v2.0 Addendum [6] COPY/SWAP: This menu contains the options to copy & swap presets, and new options to copy/swap channels within the current preset. (1) COPY CHANNEL - Copy all the settings from any one channel to another within the currently-active preset. (2) SWAP CHANNELS - Swap the settings of any two channels within the currently-active preset. (3) COPY PRESET - Copies a preset to any new location.
MP-201 Multi-Pedal Manual Firmware v2.0 Addendum Map of MP-201 v2.0 EDIT menu: parameters are listed per CHANNEL MODE below.
MP-201 Multi-Pedal Manual Firmware v2.
MP-201 Multi-Pedal Manual Firmware v2.0 Addendum COMMON PARAMETERS (all channel modes) CHAN NAME (8 characters) INITIALSTATE (OFF, ON) CHANNEL MODE (EXPRESSION, GATE, LFO, MIDI TO CV, NOISE) MIDI CHANNEL (OFF, 1-16) if MIDI Channel not OFF: PGM CHANGE# (OFF, 0 - 127) BANK CHANGE# (LSB 0-127, MSB 0-127) Page | 11 Specifications subject to change without notice moogmusic.
MP-201 Multi-Pedal Manual Firmware v2.
