User Manual

24
Although you can control all Subsequent 25 functions directly from the front
panel, you’ll need to dig a little deeper to reach some of them. Shift mode
reassigns several front-panel controls so you can use them to edit hidden
parameters. Like all parameters, changes you make in Shift mode are
memorized when you save your Preset.
Engage Shift mode by holding down the BANK 4 button and then pressing the
ACTIVATE PANEL button. When you do, all the BANK and PATCH buttons will
go dark and the ACTIVATE PANEL button will blink. Pressing ACTIVATE PANEL
again will cancel Shift mode and return all the controls to their normal functions.
KNOB & BUTTON REASSIGNMENTS IN SHIFT MODE
PARAMETER: FILTER ENVELOPE DELAY
KNOB: FILTER ENVELOPE ATTACK
Adding a Delay stage to the Filter Envelope lets you specify a timed pause
before the onset of the Attack, effectively turning an ADSR Envelope into a
DADSR Envelope. By engaging Shift mode and turning the Amplifier Envelope’s
ATTACK knob, you can vary the Envelope’s Delay time from a minimum of 0 to a
maximum of 10 seconds. The Filter Envelope Delay stage is only available when
the Filter Envelope Repeat parameter is on (see Hidden Parameters on page 32).
PARAMETER: FILTER ENVELOPE HOLD
KNOB: FILTER ENVELOPE DECAY
Adding a Hold stage to the Filter Envelope lets you specify a fixed period
of time between the Attack and Sustain stages, effectively turning an ADSR
Envelope into an AHDSR Envelope. During this stage, the filter’s Cutoff
frequency is held at its maximum level, which is determined by the filter’s
EG AMOUNT setting. By engaging Shift mode and turning the Filter Envelope’s
DECAY knob, you can vary the Envelope’s Hold time from a minimum of 0 to a
maximum of 10 seconds.
PARAMETER: VELOCITY TO FILTER ENVELOPE AMOUNT
KNOB: FILTER ENVELOPE SUSTAIN
To make your sounds get brighter as you press the keys faster on the keyboard,
engage Shift mode and turn up the Filter Envelope’s SUSTAIN knob. The knob’s
range varies from 0 to 100%.
SHIFT MODE