User Manual

Table Of Contents

PARAMETER: VELOCITY TO FILTER ENVELOPE DECAY/RELEASE

KNOB: FILTER ENVELOPE RELEASE

Changing this setting lets you specify how much velocity affects the Filter

Envelope’s Decay and Release times. To lengthen the Decay and Release in

response to how hard you play on the keyboard, engage Shift mode and turn

up the Filter Envelope’s RELEASE knob. The knob’s range is from 0 to 100%.

PARAMETER: AMPLIFIER ENVELOPE DELAY

KNOB: AMPLIFIER ENVELOPE ATTACK

Adding a Delay stage to the Ampliﬁer Envelope lets you specify a timed pause

before the onset of the Attack, effectively turning an ADSR Envelope into a

DADSR Envelope. By engaging Shift mode and turning the Ampliﬁer Envelope’s

ATTACK knob, you can vary the Envelope’s Delay time from a minimum of 0 to

a maximum of 10 seconds. The Ampliﬁer Envelope Delay stage is only available

when the Ampliﬁer Envelope Repeat parameter is on (see Hidden Parameters

on page 34).

PARAMETER: AMPLIFIER ENVELOPE HOLD

KNOB: AMPLIFIER ENVELOPE DECAY

Adding a Hold stage to the Ampliﬁer Envelope lets you specify a ﬁxed period

of time between the Attack and Sustain stages, effectively turning an ADSR

Envelope into an AHDSR Envelope. During this stage, the Mixer output’s

amplitude is held at its maximum value. By engaging Shift mode and turning

the Ampliﬁer Envelope’s DECAY knob, you can vary the Envelope’s Hold time

from a minimum of 0 to a maximum of 10 seconds.

PARAMETER: VELOCITY TO AMPLIFIER ENVELOPE AMOUNT

KNOB: AMPLIFIER ENVELOPE SUSTAIN

Your Patches will be much more dynamic if you make a habit of programming

their velocity sensitivity. To make your sounds get louder as you press the

keys faster on the keyboard, engage Shift mode and turn up the Ampliﬁer

Envelope’s SUSTAIN knob. The knob’s range varies from 0 to 100%.

PARAMETER: VELOCITY TO AMPLIFIER ENVELOPE DECAY/RELEASE

KNOB: AMPLIFIER ENVELOPE RELEASE

Changing this setting lets you specify how much velocity affects the Ampliﬁer

Envelope’s Decay and Release times. To lengthen the Decay and Release in

response to how fast you press the keys on the keyboard, engage Shift mode

and turn up the Ampliﬁer Envelope’s RELEASE knob. The knob’s range is from

0 to 100%.

SHIFT MODE (Continued)