User Manual

40
AFTERTOUCH SCALE
This parameter controls the scaling of the aftertouch
effect, and how deeply the use of aftertouch will
affect the VCF Cutoff frequency. Smaller scale values
will produce less effect; larger scale values will have
considerably more effect.
Engage Shift mode and press the BANK 2, BANK 4,
PATCH 1, and PATCH 3 buttons. Pressing the low C key
turns the Aftertouch Scale off, creating no effect. Use
any of the remaining keys to set the Aftertouch Scale,
from the smallest scale value of low C# (minimum) to
the largest scale value of the highest C (maximum).
NOTE: The value of this parameter can be set using up to five
octaves of keys, exceeding the Subsequent 25 keyboard range.
Sending a MIDI note from an external device can set this value
beyond the range of the Subsequent 25 keyboard itself.
SYSTEM COMMANDS
Whenever you invoke a system command, you cause some kind of irreversible change. For this reason,
each command requires that you press a key twice to confirm your choice. Once you’ve selected a
command, press the C# key twice to invoke it, or press the C key to cancel it.
INITIALIZE PRESET
Engage Shift mode and press BANK 3, BANK 4, and PATCH 1. Press C# twice to
reset all the Shift-mode parameters to their default settings.
INITIALIZE GLOBAL PARAMETERS
Engage Shift mode and press BANK 3, BANK 4, and PATCH 2. Press C# twice to
reset the global parameters (Local Control, MIDI Output Filter, Use Preset Volume,
Use Preset MOD Wheel, Note Priority, Knob Wheel) to their default setting.
HIDDEN PARAMETERS (Continued)
Aftertouch Amount +
Aftertouch Scale OFF