Instruction manual

ManualsBrandsMoog Videolarm ManualsSecurity CamerasFDW7C12S-3

www.videolarm.com

F D W 7 C N - 3

Outdoor / Indoor PTZ Fusion Dome Mount

Installation and Operation Instructions for the following models:

Before attempting to connect or operate this product, please read these

instructions completely. To be used with the 81-IN5409 Instruction Manual.

CERTIFIED

81-IN5357

07-26-2010

FDW7CN-3 IP Network Ready 7” Outdoor FusionDome PTZ Camera System with 23x zoom

IFDW7CN-3 Day/Night camera, wall mount, MPEG-4/ MJPEG video compression, full D1.

(Indoor) Clear dome, with 24Vac input, heater/blower (Outdoor only)

FDP7CN-3 IP Network Ready 7” Outdoor FusionDome PTZ Camera System with 23x zoom Day/Night

IFDP7CN-3 camera, pendent mount, MPEG-4/ MJPEG video compression, full D1. Clear dome, with

(Indoor) 24Vac input, heater/blower (Outdoor only)

FDW7CS-3 (Analog Version) 7” Outdoor FusionDome PTZ Camera System with 23x zoom Day/Night

IFDW7TS-3 camera, wall mount, MPEG-4/ MJPEG video compression, full D1. Clear dome, with

(Indoor) 24Vac input, heater/blower (Outdoor only)

FDP7CS-3 (Analog Version) 7” Outdoor FusionDome PTZ Camera System with 23x zoom

IFDP7CS-3 Day/Night camera, pendent mount, MPEG-4/ MJPEG video compression, full D1.

(Indoor) Clear dome, with 24Vac input, heater/blower (Outdoor only)

The unit is available in both tinted (T) and clear (C) Models

Summary of content (13 pages)

PAGE 1
© 2009-2010, Moog Videolarm, Inc. All Rights Reserved FDW7CN-3 Outdoor / Indoor PTZ Fusion Dome Mount www.videolarm.com Installation and Operation Instructions for the following models: FDW7CN-3 IP Network Ready 7” Outdoor FusionDome PTZ Camera System with 23x zoom IFDW7CN-3 Day/Night camera, wall mount, MPEG-4/ MJPEG video compression, full D1.
PAGE 2
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER ( OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SEVICING TO QUALIFIED SERVICE PERSONNEL. Do not block any of the ventilation openings.
PAGE 3
LIMITED WARRANTY FOR VIDEOLARM INC. PRODUCTS VIDEOLARM INC. warrants this Product to be free from defects in material or workmanship,as follows: PRODUCTCATEGORY PARTS LABOR All Enclosuresand Electronics Five (5) Years Five (5) Years Pan/Tilts Three (3) Years **6 months if used in autoscan Three (3) Years **6 months if used in autoscan /tour operation Poles/PoleEvators Three (3) Years /tour operation Three (3) Years Warrior/Q-View/I.R.
PAGE 4
! Electrical Specifications Power 24VAC Class 2 Only English Español Français Deutsch Contents of Box FDW7CN-3 FDW7CS-3 FDP7CN-3 FDP7CS-3 * IFDW7CN-3 * IFDP7CN-3 24 VAC 80 Watts Accessories: Heater: 50 Watts, Blower: 2 Watt Camera Power: (See Camera Specifications): 28 Watts Max Tools Required: .
PAGE 5
1 WALL MOUNTING 2 4”-5” Bracket is designed for 45° conduit fitting (If using the conduit). Run wire into bracket secure to wall. • El soporte se diseña para la guarnición del conducto 45° (si usa el conducto). Funcione con el alambre en el soporte seguro para emparedar. • La parenthèse est conçue pour l'ajustage de précision du conduit 45° (si à l'aide du conduit). Courez le fil dans la parenthèse bloquée pour murer.
PAGE 6
5 ! Important Gasket Must be in place Align large arrows 6 To lock turn clockwise • Con seguridad soporte del montaje a emparedar. Tire del cableado a través del soporte y del ojal de la posición según lo demostrado. • Con seguridad soporte del montaje a emparedar. Tire del cableado a través del soporte y del ojal de la posición según lo demostrado. • Solidement parenthèse de bâti à murer. Tirez le câblage par la parenthèse et le canon isolant de position comme montré.
PAGE 7
8 FOR PENDENT/ WALL MOUNTING 9 4”-5” Trim incoming control and power wires to 4-5 for either wall or pendent bracket • La tapa segura de la cubierta SM5 con mercancías duras proporcionó; termine a la asamblea por las instrucciones SM5 • Le dessus bloqué du logement SM5 avec les articles durs a fourni; accomplissez l'assemblée par instructions SM5 • Sichere Oberseite des Gehäuses SM5 mit den harten Waren bereitgestellt; schließen Sie Versammlung pro Anweisungen SM5 ab • Parte superior segura da carcaça S
PAGE 8
11 12 Important Gasket Must be in place ! Align large arrows To lock turn clockwise • Alinee las flechas grandes • Alinee las flechas grandes • Alignez les grandes flèches • Alignez les grandes flèches • Richten Sie große Pfeile aus • Richten Sie große Pfeile aus • Alinhe grandes setas • Alinhe grandes setas • Allini le grandi frecce • Allini le grandi frecce 13 Secure with ¼” Allen wrench • Asegure con la llave Allen del ¼” • Fixez clé Allen avec de ¼” • Sichern Sie mit ¼“ Inbusschlüssel •
PAGE 9
15 NETWORK: ANALOG: RJ45 24VAC 1 2 3 4 24VAC POWER Camera Camera Heater/Blower Red Orange Yellow Heater/Blower Green Max 28 Watts 52 Watts 1 2 3 4 Red Orange Yellow Heater/Blower Green 1/0 1 2 3 4 Alarm 1 Alarm 2 Alarm 3 Common POWER Camera Camera Heater/Blower Max 28 Watts 52 Watts 1/0 Blue Violet Gray White 1 2 3 4 RS-485RX A Blue RS-485RX B RS-485TX A RS-485TX B Violet Gray White BNC BNC (Not Used with NETWORK) Make the appropriate male and female connections.
PAGE 10
18 19 Remove Pan/Tilt from shipping carton. Install in base bracket in housing. CAPTIVE SCREW To secure in place, tighten captive screw. • Quite Pan/Tilt del cartón del envío. Instale en soporte bajo en la cubierta. • Enlevez Pan/Tilt du carton d'expédition. Installez dans la parenthèse basse dans le logement. • Entfernen Sie Pan/Tilt vom Verschiffenkarton. Bringen Sie in niedrigen Haltewinkel im Gehäuse an. • Remova Pan/Tilt da caixa do transporte. Instale no suporte baixo na carcaça.
PAGE 11
22 23 Tab Wipe the dome clean. • Limpie la bóveda limpia. • Essuyez le dôme. • Wischen Sie die Haube sauber ab. • Limpe a abóbada limpa. • Asciughi la cupola. Loop the lanyard around the tab inside the housing. • Coloque el acollador alrededor de la lengüeta dentro de la cubierta. • Faites une boucle la lanière autour de l'étiquette à l'intérieur du logement. • Schlingen Sie die Abzuglinie um den Vorsprung innerhalb des Gehäuses. • Dê laços no colhedor em torno da aba dentro da carcaça.
PAGE 12
Replacement Parts List FDW7CN-3 FDW75 14 15 16 13 12 21 11 20 10 9 19 18 17 8 22 7 5 6 4 3 1 2 1 1A 2 3 4 5 5A 6 7 8 8A 9 10 11 12 13 14 15 16 N/S N/S N/S 17 18 19 20 21 22 PART NUMBER FD7C FD7T RPFD7501 RPFD703 RPNET02 RPFD072 RPFD072/12 RPFD080 RP3510 RP70FP7PB RP70FP7PB12 RPFD040 RPFD2612 RPFD3245 RPGK3356 RP3458 RP3551 RP3606 RP3719 RPPKH2098 RPPKE1100 RPTRAN02 RPVL2857 RP76VL385A RP96PSGK08 RPVL3097 RP76P0F060E RP7OP14015 DESCRIPTION CLEAR REPLACEMENT CAPSULE TINTED REPLACEMENT CAPS
PAGE 13
Product Registration/Warranty Thank you for choosing Videolarm. We value your patronage and are solely committed to providing you with only the highest quality products available with unmatched customer service levels that are secondto-none in the security industry.