Instruction manual

ManualsBrandsMoog Videolarm ManualsSecurity CamerasSM7TN-3

www.videolarm.com

SM7CN-3

SView™ Outdoor Vandal-Resistant Surface Mount Dome

Installation and Operation Instructions for the following models:

SM7CN-3

IP Network Ready 7” Outdoor Vandal-Resistant Surface

Mount PTZ Camera System - can be mounted facing down or

facing towards the sky - with 36x zoom Day/ Night camera, wall

mount, MPEG-4 and MJPEG video compression, full D1.

Clear dome, with 24Vac input, heater/ blower

SM7CS-3 (Analog version)

IP Network Ready 7” Outdoor Vandal-Resistant Surface Mount

PTZ Camera System - can be mounted facing down or facing

towards the sky - with 36x zoom Day/ Night camera, wall mount,

MPEG-4 and MJPEG video compression, full D1. Clear dome,

with 24Vac input, heater/ blower

Before attempting to connect or operate this product, please read these

instructions completely. To be used with the 81-IN5409 Instruction Manual.

CERTIFIED

81-IN5385

01-15-2009

Summary of content (10 pages)

PAGE 1
© 2009, Videolarm, Inc. All Rights Reserved SM7CN-3 SView™ Outdoor Vandal-Resistant Surface Mount Dome © 2009, Videolarm, Inc. All Rights Reserved www.videolarm.com Installation and Operation Instructions for the following models: SM7CN-3 IP Network Ready 7” Outdoor Vandal-Resistant Surface Mount PTZ Camera System - can be mounted facing down or facing towards the sky - with 36x zoom Day/ Night camera, wall mount, MPEG-4 and MJPEG video compression, full D1.
PAGE 2
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 Do not block any of the ventilation openings. Install in accordance with the SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN manufacturers instructions. 8 Cable Runs- All cable runs must be within permissible distance.
PAGE 3
LIMITEDWARRANTY FOR VIDEOLARM INC. PRODUCTS VIDEOLARMINC. warrantsthis Productto be free from defectsin materialor workmanship,as follows: PRODUCTCATEGORY PARTS LABOR All Enclosures and Electronics Five (5) Years Five (5) Years Pan/Tilts Three (3) Years **6 months if used in autoscan Three (3) Years **6 months if used in autoscan /tour operation Poles/PoleEvators Three (3) Years /tour operation Three (3) Years Warrior/Q-View/I.R.
PAGE 4
! Electrical Specifications Contents of Box SM7CN-9 SM7CS-9 Power 24VAC Class 2 Only English Español Français Deutsch 24 VAC 80 Watts Accessories: Heater: 50 Watts, Blower: 2 Watt Camera Power: (See Camera Specifications): 28 Watts Max Tools Required: .
PAGE 5
1 Wall Mounting Wall Mounting 2 WALL Use teflon tape WALL MOUNT Use Teflon Tape (included) to seal conduit plugs. • Utilice la cinta del Teflon (incluida) para sellar los enchufes del conducto. • Utilisez la bande de teflon (incluse) pour sceller des prises de conduit. • Benutzen Sie das Teflonklebeband (eingeschlossen) um Rohrstecker zu versiegeln. • Use a fita adesiva do Teflon (incluída) selar plugues da canalização. • Utilizzi il nastro del Teflon (incluso) per sigillare le spine del condotto.
PAGE 6
5 Surface Mounting ! Remove the (4) side plates . Mounting Surface should be of suitable material such as brick, concrete, wood etc. • Quite (4) las placas laterales usando la herramienta de la seguridad proporcionada. La superficie de montaje debe estar de material conveniente tal como ladrillo, concreto, madera etc. • Enlevez (4) les plats latéraux à l'aide de l'outil de sécurité fourni. La surface de montage devrait être de matériel approprié tel que la brique, le béton, le bois etc...
PAGE 7
10 9 A B C D ,5 22 RJ45 24VAC 1 2 3 4 Camera Camera Heater/Blower Heater/Blower 1 2 3 4 Alarm 1 Alarm 2 Alarm 3 Common ,75 20 1,0 18 1,5 16 2,5 14 4 12 6 10 MM2 AWG POWER Red Orange Yellow Green Max 28 Watts 52 Watts 1/0 Blue Violet Gray White BNC Make the appropriate male and female connections. Indoor model does not include pre-run cables. • Haga las conexiones masculinas y femeninas apropiadas. El modelo de interior no incluye pre-funciona los cables.
PAGE 8
13 14 Green Yellow Orange Accessory Power Camera Power Red Camera = red & orange wires to terminal Heater/Blower = yellow & green wires to terminal • Cámara fotográfica = alambres rojos y anaranjados al terminal Heater/Blower = alambres del amarillo y del verde al terminal • Appareil-photo = fils rouges et oranges à la borne Heater/Blower = fils de jaune et de vert à la borne • Kamera = rote u. orange Leitungen zum Anschluß Heater/Blower = Gelb- u.
PAGE 9
17 Make sure there are NO GAPS or EDGES between the seal edge and the dome’s surface. • Cerciórese de que no haya BOQUETES o BORDES entre el borde del sello y la superficie de la bóveda. • Assurez-vous qu'il n'y a AUCUNE LACUNE ou BORD entre le bord de joint et la surface du dôme. • Stellen Sie sicher, daß es KEINE ABSTÄNDE oder RÄNDER zwischen dem Dichtung Rand und der Oberfläche der Haube gibt. • Certifique-se que não há NENHUMA ABERTURA ou BORDA entre a borda do selo e a superfície da abóbada.
PAGE 10
Product Registration/Warranty Thank you for choosing Videolarm. We value your patronage and are solely committed to providing you with only the highest quality products available with unmatched customer service levels that are second-to-none in the security industry.