Instruction manual

ManualsBrandsMoog Videolarm ManualsSecurity CamerasSView FDP7CS-3

www.videolarm.com

F D W 7 C N - 3

Outdoor / Indoor PTZ Fusion Dome Mount

Installation and Operation Instructions for the following models:

FDW7CN-3 IP Network Ready 7” Outdoor FusionDome PTZ Camera System with 23x

IFDW7CN-3 zoom Day/Night camera, wall mount, MPEG-4/ MJPEG video compression,

(Indoor) full D1. Clear dome, with 24Vac input, heater/blower (Outdoor only)

FDP7CN-3 IP Network Ready 7” Outdoor FusionDome PTZ Camera System with 23x zoom

IFDP7CN-3 Day/Night camera, pendent mount, MPEG-4/ MJPEG video compression, full D1.

(Indoor) Clear dome, with 24Vac input, heater/blower (Outdoor only)

FDW7CS-3 (Analog Version) 7” Outdoor FusionDome PTZ Camera System with 23x zoom

IFDW7TS-3 Day/Night camera, wall mount, MPEG-4/ MJPEG video compression, full D1.

(Indoor) Clear dome, with 24Vac input, heater/blower (Outdoor only)

FDP7CS-3 (Analog Version) 7” Outdoor FusionDome PTZ Camera System with 23x zoom

IFDP7CS-3 Day/Night camera, pendent mount, MPEG-4/ MJPEG video compression, full

(Indoor) D1. Clear dome, with 24Vac input, heater/blower (Outdoor only)

The unit is available in both tinted (T) and clear (C) Models

Before attempting to connect or operate this product, please read these instructions completely.

To be used with the 81-IN5409 Instruction Manual.

81-IN5357

01-23-2012

Summary of content (13 pages)

PAGE 1
© 2011, Moog Videolarm, Inc. All Rights Reserved FDW7CN-3 Outdoor / Indoor PTZ Fusion Dome Mount www.videolarm.com Installation and Operation Instructions for the following models: FDW7CN-3 IFDW7CN-3 (Indoor) FDP7CN-3 IFDP7CN-3 (Indoor) FDW7CS-3 IFDW7TS-3 (Indoor) FDP7CS-3 IFDP7CS-3 (Indoor) IP Network Ready 7” Outdoor FusionDome PTZ Camera System with 23x zoom Day/Night camera, wall mount, MPEG-4/ MJPEG video compression, full D1.
PAGE 2
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8 9 SAFETY PRECAUTIONS Cable Runs- All cable runs must be within permissible distance.
PAGE 3
Limited Warranty for Moog Videolarm Products Moog Videolarm warrants these products to be free from defects in material or workmanship as follows: PRODUCT CATEGORY PARTS \ LABOR All Enclosures and Electronics* Five Poles/PolEvators™/CamEvator Three (3) Years Warrior Series™/Q-View™/IR Illuminators Five (5) Years SView Series™ Five (5) Years **6 months if used in auto scan/tour operation Controllers Five (5) Years Power Supplies Five (5) Years EcoKit Three (3) Years Accessory Brackets F
PAGE 4
! Electrical Specifications Power 24VAC Class 2 Only English Español Français Deutsch Contents of Box FDW7CN-3 FDW7CS-3 FDP7CN-3 FDP7CS-3 * IFDW7CN-3 * IFDP7CN-3 24 VAC 80 Watts Accessories: Heater: 50 Watts, Blower: 2 Watt Camera Power: (See Camera Specifications): 28 Watts Max Tools Required: .
PAGE 5
1 WALL MOUNTING 2 4”-5” Bracket is designed for 45° conduit fitting (If using the conduit). Run wire into bracket, secure to wall. • El soporte se diseña para la guarnición del conducto 45° (si usa el conducto). Funcione con el alambre en el soporte seguro para emparedar. • La parenthèse est conçue pour l'ajustage de précision du conduit 45° (si à l'aide du conduit). Courez le fil dans la parenthèse bloquée pour murer.
PAGE 6
5 ! Important Gasket Must be in place Align large arrows. • Alinee las flechas grandes. 6 To lock, turn clockwise. • Para trabarse, dar vuelta a la derecha. • Pour fermer à clef, tourner dans le sens des aiguilles d'une montre. • Alignez les grandes flèches. • Zu sich verriegeln, nach rechts drehen. • Para travar, para girar no sentido horário. • Richten Sie große Pfeile aus. • Alinhe grandes setas. • Allini le grandi frecce. 7 Secure with ¼” Allen wrench. • Asegure con la llave Allen del ¼”.
PAGE 7
8 FOR PENDENT/ WALL MOUNTING 9 4”-5” Trim incoming control and power wires to 4-5” for either wall or pendent bracket. • Ajuste los alambres entrantes del control y de la energía a 4-5” para la pared o el soporte pendiente. • Équilibrez les fils entrants de commande et de puissance à 4-5 » pour le mur ou la parenthèse en suspens. • Trimmen Sie ankommende Steuer- und Energiendrähte bis 4-5“ entweder für Wand oder pendent Haltewinkel.
PAGE 8
11 12 Important Gasket Must be in place ! Align large arrows. To lock, turn clockwise. • Alinee las flechas grandes. • Para trabarse, dar vuelta a la derecha. • Alignez les grandes flèches. • Pour fermer à clef, tourner dans le sens des aiguilles d'une montre. • Richten Sie große Pfeile aus. • Alinhe grandes setas. • Allini le grandi frecce. 13 Secure with ¼” Allen wrench. • Asegure con la llave Allen del ¼”. • Fixez clé Allen avec de ¼”. • Sichern Sie mit ¼“ Inbusschlüssel.
PAGE 9
15 NETWORK: RJ45 24VAC 1 2 3 4 POWER Camera Camera Heater/Blower Red Orange Yellow Heater/Blower Green Max 28 Watts 52 Watts 1/0 1 2 3 4 Alarm 1 Alarm 2 Alarm 3 Common Blue Violet Gray White Make the appropriate male and female connections. Indoor model does not include pre-run cables. • Haga las conexiones masculinas y femeninas apropiadas. El modelo de interior no incluye pre-funciona los cables. • Établissez les rapports masculins et femelles appropriés.
PAGE 10
18 19 Remove Pan/Tilt from shipping carton. Install in base bracket in housing. CAPTIVE SCREW To secure in place, tighten captive screw. • Quite Pan/Tilt del cartón del envío. Instale en soporte bajo en la cubierta. • Enlevez Pan/Tilt du carton d'expédition. Installez dans la parenthèse basse dans le logement. • Entfernen Sie Pan/Tilt vom Verschiffenkarton. Bringen Sie in niedrigen Haltewinkel im Gehäuse an. • Remova Pan/Tilt da caixa do transporte. Instale no suporte baixo na carcaça.
PAGE 11
22 23 Tab Wipe the dome clean. • Limpie la bóveda limpia. • Essuyez le dôme. • Wischen Sie die Haube sauber ab. • Limpe a abóbada limpa. • Asciughi la cupola. Loop the lanyard around the tab inside the housing. • Coloque el acollador alrededor de la lengüeta dentro de la cubierta. • Faites une boucle la lanière autour de l'étiquette à l'intérieur du logement. • Schlingen Sie die Abzuglinie um den Vorsprung innerhalb des Gehäuses. • Dê laços no colhedor em torno da aba dentro da carcaça.
PAGE 12
Replacement Parts List FDW7CN-3 FDW75 14 15 16 18 13 12 17 20 11 10 9 19 8 7 5 6 4 3 1 2 1 1A 2 3 4 5 5A 6 7 8 8A 9 10 11 12 13 14 15 16 N/S N/S N/S 17 18 19 20 PART NUMBER FD7C FD7T RPFD7501 RPFD703 RPNET02 RPFD072 RPFD072/12 RPFD080 RP3510 RP70FP7PB RP70FP7PB12 RPFD040 RPFD2612 RPFD3245 RPGK3356 RP3458 RP3551 RP3606 RP3719 RPPKH2098 RPPKE1100 RPTRAN02 RPVL2857 RP76VL385A RP96PSGK08 RP76EN7401 DESCRIPTION CLEAR REPLACEMENT CAPSULE TINTED REPLACEMENT CAPSULE LOWER TRIM RING DOME CLAMPING R
PAGE 13
Product Registration/Warranty Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest quality products available and superior customer service. Should a problem arise, rest assure that Moog Videolarm stands behind its products by offering impressive warranty plans: 3 Years on all Housings, Poles, Power Supplies, and Accessories and 5 Years on camera systems (SView, QView, Warriors), and InfraRed Illuminators.