User`s manual

CHAPTER 1.0 Overview 1-10
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
1.6.3 Standard I/O
Drive Ready (J2C)
Relay output, contact ratings: 36V, 100mA max.
Closed when drive is ready and has no faults.
Brake Control (J2D)
2A, 24Vd.c. solid-state high-side drive for motor brake control.
Switched under user control or DS2110 software control
Motor Position
Feedback Type
(J3/J4)
Resolver Encoder Types
• SSI
• Hiperface
• Analogue encoders
• Endat
• NRZ serial
Communications
Interfaces (J1)
RS232 Interface at 19200Baud
Table 1.8 DS2110 Standard I/O Summary
1.6.4 Variant Specific I/O
Refer to the appendix for details on a specific fieldbus variant.