User`s manual

APPENDIX B – GUI B-23
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
B.2.16.20 Continuous Bus Voltage
The Continuous Bus Voltage panel shows the bus voltage status and allows the voltage limits to be set.
• Detected Bus Voltage (V) → The actual value of the bus voltage.
• Over Voltage Limit (V) → The bus voltage at which a bus over-voltage fault is indicated.
• Under Voltage Limit (V) → The bus voltage at which a bus under-voltage fault is indicated. This is read only,
the value being set by the percentage parameter.
• Under Volt. Limit % of Vdc Nom. (%)→ The percentage of the nominal voltage that will be used as the under
voltage limit.