User`s manual

CHAPTER 3.0 Wiring and Installation 3-58
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
3.13.4 D Size Power Stage
- Fixed connector: 12 pole, screw terminal
- D size wiring: cable 6 AWG (13 mm
2
) for 50/140
- D size wiring: cable 4 AWG ( 21mm
2
) for 60/180
- PE Terminal wiring: cable 6 AWG (13 mm
2
) for 50/140
- PE Terminal wiring: cable 4 AWG (21 mm
2
) for 60/180
- Stripping Length 16mm
- Tightening Torque: 2-2.3Nm
Pos. Name Function
J9.1 RR Regeneration Resistance
J9.2 +ATP DC Bus (+)
J9.3 PE Protective Earth Screw Terminal
J9.4 U1
Phase "L1", three-phase voltage input 230/460Vac ±10%
J9.5 V1
Phase "L2", ", three-phase voltage input 230/460Vac ±10%
J9.6 W1
Phase "L3", ", three-phase voltage input 230/460Vac ±10%
J9.7 U2 Motor Phase U
J9.8 V2 Motor Phase V
J9.9 W2 Motor Phase W
J9.10 PE Motor Protective Earth
J9.11 +AT DC Bus (+)
J9.12 -AT DC Bus (-)
- Fixed connector: 2 pins, male connector
- Mating connector, 2 pins, female, supplied with the drive. Wago (Part # 231-102/026-000)
- D size wiring: cable 14 AWG (2.1 mm
2
).
- Stripping Length 8mm
Pos. Name Function
J8.1 24V +24V Logic Backup Supply
J8.2 0V Logic Supply Return