User`s manual

CHAPTER 3.0 Wiring and Installation 3-59
CDS7324 (FORMERLY LSF-0819)
Rev. A INSTALLATION & USER’S MANUAL
3.13.5 E Size Power Stage
- Fixed connector: 14 pole, screw terminal
- Pos 1,2: Cable 14 AWG (2.1 mm
2
) , Stripping 9mm , Torque 0.7Nm
- Pos 3,4: Cable 2 AWG (34 mm
2
) , Stripping 19mm , Torque 4Nm
- Pos 5-14: Cable 1 AWG (42 mm
2
) , Stripping 24mm , Torque 8Nm
Pos. Name Function
J9.1 24V fans
Voltage inputs 24Vdc fans ±10%, 2A
J9.2 0V fans
J9.3 RR Regeneration Resistance
J9.4 +ATP DC Bus (+)
J9.5 PE Protective Earth Screw Terminal
J9.6 U1
Phase "L1", three-phase voltage input 230/460Vac ±10%
J9.7 V1
Phase "L2", ", three-phase voltage input 230/460Vac ±10%
J9.8 W1
Phase "L3", ", three-phase voltage input 230/460Vac ±10%
J9.9 PE Motor Protective Earth
J9.10 U2 Motor Phase U
J9.11 V2 Motor Phase V
J9.12 W2 Motor Phase W
J9.13 +AT DC Bus (+)
J9.14 -AT DC Bus (-)
- Fixed connector: 2 pins, male connector
- Mating connector, 2 pins, female, supplied with the drive. Wago (Part # 231-102/026-000)
- E size wiring: cable 14 AWG (2.1 mm
2
).
- Stripping Length 8mm
Pos. Name Function
J8.1 24V +24V Logic Backup Supply
J8.2 0V Logic Supply Return