User's Manual

18
TUNING
Normally, the tuning of the Theremini is
set to A4 = 440Hz. However, this can be
changed if you need to play in concert
with another instrument that is not or
cannot be tuned to A4 = 440Hz. Adjust
the tuning using the PRESETS knob.
MIDI CV SETUP
The MIDI CV SETUP menu offers access
to parameters that allow the Theremini
to send and receive MIDI messages, and
to transmit CV (Control Voltage) signals.
The CV output provides analog control of
CV OUT
SOURCE: Use the PRESETS knob to
choose either the Pitch antenna or the
Volume antenna as the control source for
the Control Voltage output jack on the
Theremini’s rear panel. Press the SETUP
button to advance to the next parameter.
MIDI CC OUT
PITCH: Use the PRESETS knob to assign
a MIDI CC number (0—127) to the output
of the Pitch antenna. Press the SETUP
button to advance to the next parameter.
the Moog family of analog effects and
synthesizers, as well as any instrument or effect that supports analog control.
To enter the MIDI CV SETUP menu from within the Setup Mode, press the
EFFECT button. To quickly exit the MIDI CV SETUP menu and return to the
main screen, simultaneously press the SETUP and EFFECT buttons.
TYPE: Choose either 7-bit or 14-bit MIDI output.
VOLUME: Use the PRESETS knob to assign a MIDI CC number (0—127) to
the output of the Volume antenna. Press the SETUP button to advance to
the next parameter.
TYPE: Choose either 7-bit or 14-bit MIDI output.