User's Manual

REAR PANEL CONNECTIONS

Although your Theremini is a complete instrument on its own, it can be

easily connected to ampliﬁers, computers, tablets, recording equipment,

or other analog instruments. Here is a detailed look at the rear panel

connectors available on the Theremini.

AUDIO OUTPUTS L (LEFT), R (RIGHT)

To make the most of the onboard stereo effects, the Theremini is equipped

with stereo outputs. Each line level output is equipped with an unbalanced

1/4” jack. These outputs are suitable for use with an external ampliﬁer,

recording equipment, etc... The Output level is set using the Master Volume

setting in the Setup Mode.

Note: If only one jack is used, a summed mono signal will be provided via that output.

CV OUTPUT

The Theremini provides a 1/4” Control Voltage output jack that can be used

to interface with other analog synthesizers and effects. The function and

voltage range of the CV output can be speciﬁed in the MIDI/CV Setup menu.

SHORT

LONG