User's Manual

32
6. “MY THEREMINI WON’T STOP MAKING SOUND.”
If your Theremini continues to drone when it is not being played, you may
want to use the Auto Mute feature. Auto Mute will cause the Theremini to
stop making sound when you are physically away from your Theremini’s
Pitch antenna. To activate Auto Mute, press the SETUP button to enter the
Setup menu and keep pressing SETUP until you reach the Auto Mute page.
If you do not want to use auto mute, you can simply drape the Theremini’s
power or audio cable over the volume antenna when not in use.
7. “MY DISPLAY IS TOO DARK OR SEEMS FADED.”
Try adjusting the display contrast. The display contrast is a parameter
that can only be accessed from the Theremini’s Advanced Menu. To get
to the advanced menu, start on the Theremini’s main screen (the screen
with the tuner). Press SETUP and SCALE at the same time. While holding
down SETUP and SCALE, turn the PRESET encoder one click to the right.
You are now in the Advanced Menu. Press SETUP until the display reads
“Contrast…..xx”. Now, turn the PRESET encoder to get the desired LCD
contrast. Once you have the desired contrast, press SETUP to return to
the main screen.
SPECIFICATIONS:
PITCH DETECTION: Heterodyning analog oscillator
SYNTHESIS ENGINE: Animoog-derived wavetable
PRESETS: 32
DISPLAY: 128 x 64 pixel backlit LCD
INTERNAL SPEAKER: 2-inch, full-range
HEADPHONE JACK: 1/8” (3.5mm) TRS headphone jack.
AUDIO OUTPUTS (L, R): 1/4” unbalanced; Line Level,
OUTPUT IMPEDANCE = 680 ohm nominal
CV OUTPUT: 1/4” unbalanced; 0~5 Volt / 0~10 Volt (selectable)
OUTPUT IMPEDANCE = 330 ohm nominal
SECURITY: Kensington Slot Type
USB MIDI: Full-speed USB 2.0; USB Mini-B connector
POWER JACK: 12VDC 300mA Center Pin Positive; Power Supply Included
EXTERNAL POWER SUPPLY: 100-240VAC 50/60Hz 3W; Use Only Included Supply
DIMENSIONS: 22.75” L x 6.5” D x 15” H with antenna (4” H without antenna)
WEIGHT: 3 lbs