User's Manual

4
IMPORTANT SAFETY INSTRUCTIONS
WARNING - WHEN USING ELECTRIC PRODUCTS, THESE BASIC PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED:
1. Read all the instructions before using the product.
A. Keep these instructions. B. Heed all warnings. C. Follow all instructions.
2. WARNING: Do not use this product near water. To reduce risk of fire or electric shock, do not ex-
pose this product to rain or moisture. - For example, but not limited to: near a bathtub, washbowl,
kitchen sink, in a wet basement, or near a swimming pool or the like.
3. This product, in combination with an amplifier and headphones or speakers, may be capable of
producing sound levels that could cause permanent hearing loss. Do not operate for a long period
of time at a high volume level or at a level that is uncomfortable.
4. The product should be located so that its location does not interfere with its proper ventilation.
Do not block any ventilation openings with any items including but not limited to newspapers,
table-cloths, curtains, etc. Install in accordance with the instructions in this manual only.
5. The product should be located away from heat sources such as radiators, heat registers, or
other products that produce heat. No naked flame sources (such as candles, lighters, etc.) shall be
placed near this product.
6. The product should be connected to a power supply only of the type described in the operating
instructions or as marked on the product.
7. The power-supply cord of the product should be unplugged from the AC mains socket-outlet
when left unused for a long period of time or during lightning storms.
8. Care should be taken so that objects do not fall and liquids are not spilled into the enclosure
through openings.
8. Clean only with a dry cloth.
9. This product should only be serviced by qualified personnel for issues including but not limited to:
a. The power supply cord or the AC mains plug has been damaged.
b. Objects have fallen, or liquid has been spilled onto the product.
c. The product has been exposed to water or other source of moisture.
d. The product does not appear to operate normally or exhibits a marked
change in performance.
e. The product has been dropped or the enclosure damaged.
INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS:
Do not open the chassis. There are no user serviceable parts inside. Refer all servicing to qualified
personnel only.
GROUNDING INSTRUCTIONS: This product must be earth-grounded; if it should malfunction or
breakdown, earth-grounding provides a path of least resistance for the electrical current to reduce
the risk of electric shock. This product is equipped with a cord having an equipment grounding
connector and a earth-grounding plug (plug with a third prong). The plug must be plugged into an
appropriate socket outlet that is properly installed and earth-grounded in accordance with
all local codes and ordinances.
DANGER: Improper connection of the equipment’s earth-grounding connector can result
in a risk of electric shock. Check with a qualified electrician or serviceman if you are
in doubt as to whether the product is properly earth-grounded. Do not modify the plug
provided with this product – if it will not fit in the socket-outlet, have a proper outlet installed
by a qualified electrician.
NOTE: this equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/tv technician for help.
CAUTION: please note that any changes or modifications made to this product not expressly approved
by Moog Music Inc. Could void the user’s authority granted by the fcc to operate the equipment.