Operating instructions
3.0.0 Maintenance
This section describes how to update your Moog EXO Cameras to newer rmware versions from the web application.
1. To nd the latest le go to http://videolarm.com/technical-support/software-rmware-downloads/.
2. Click on “EXO Camera Firmware” - click, save le.
3. Navigate to your device’s web application using your favorite web browser.
4. Click on the Maintenance tab.
5.
Click on the Update button, locate downloaded rmware. You will be asked for the rmware update le; please select the
.iof le which was provided by Moog.
6. You will see the following messages indicating the status of the update:
o Firmware upload in progress... (100%)
• Lasts around 95 seconds.
o Firmware uploaded. Saving to internal storage... (0%)
• Lasts around 45 seconds.
o Validating and decompressing rmware... (0%)
• Lasts around 105 seconds.
o Firmware ready for installation. Rebooting device... (0%)
• Web page will disconnect from device until device has rebooted.
• You will be prompted for login once the device is up again.
• Lasts around 110 seconds.
o Testing rmware stability... (26%)
• Lasts 120 seconds.
o Firmware update complete. (100%)