Operating instructions

ManualsBrandsMoog ManualsSecurity CamerasFDW75C8

www.videolarm.com

F D W 7 5 C 8

Fusion Dome (Ultra high PoE)

Installation and Operation Instructions for the following models:

FDW75C8N IP Network Ready 7” Outdoor dome housing with wall mount, clear dome, PoE

input, heater/blower, fan

FDP75C8N IP Network Ready 7” Outdoor dome housing with pendant mount, clear dome, PoE

input, heater/blower, fan

FDW75T8N IP Network Ready 7” Outdoor dome housing with wall mount, tinted dome, PoE

input, heater/blower, fan

FDP75T8N IP Network Ready 7” Outdoor dome housing with pendant mount, tinted dome, PoE

input, heater/blower, fan

Before attempting to connect or operate this product, please read these instructions completely.

81-IN5471

01-31-2012

Summary of content (15 pages)

PAGE 2
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8 9 SAFETY PRECAUTIONS Cable Runs- All cable runs must be within permissible distance.
PAGE 3
Limited Warranty for Moog Videolarm Products Moog Videolarm warrants these products to be free from defects in material or workmanship as follows: PRODUCT CATEGORY PARTS \ LABOR All Enclosures and Electronics* Five Poles/PolEvators™/CamEvator Three (3) Years Warrior Series™/Q-View™/IR Illuminators Five (5) Years SView Series™ Five (5) Years **6 months if used in auto scan/tour operation Controllers Five (5) Years Power Supplies Five (5) Years EcoKit Three (3) Years Accessory Brackets F
PAGE 4
! Electrical Specifications Power POE 56V Contents of Box FDW75 POE Input Power: 100 to 240Vac (Midspan) Power: 1.3A Frequency: 50 to 60 HZ output Camera: POE (55Vdc) Heater: 56Vdc (max. 40W) English Energía de entrada: 100 a 240Vac (Midspan) Energía: 1.3A Frecuencia: 50 a 60 hertzios de salida Cámara: POE (55Vdc) Calentador: 56Vdc (máximo 40W) Español Français Deutsch Puissance d'entrée: 100 à 240Vac (Midspan) Puissance: 1.
PAGE 5
1 WALL MOUNTING 2 4”-5” Bracket is designed for 45° conduit fitting (If using the conduit). Run wire into bracket, secure to wall. • El soporte se diseña para la guarnición del conducto 45° (si usa el conducto). Funcione con el alambre en el soporte seguro para emparedar. • La parenthèse est conçue pour l'ajustage de précision du conduit 45° (si à l'aide du conduit). Courez le fil dans la parenthèse bloquée pour murer.
PAGE 6
5 ! Important Gasket Must be in place Align large arrows. • Alinee las flechas grandes. 6 To lock, turn clockwise. • Para trabarse, dar vuelta a la derecha. • Pour fermer à clef, tourner dans le sens des aiguilles d'une montre. • Alignez les grandes flèches. • Zu sich verriegeln, nach rechts drehen. • Para travar, para girar no sentido horário. • Richten Sie große Pfeile aus. • Per per chiudere, girare in senso orario. • Alinhe grandes setas. • Allini le grandi frecce.
PAGE 7
9 Secure lanyard to lanyard clip. • Asegure el acollador al clip del acollador. • Fixez la lanière à l'agrafe de lanière. • Befestigen Sie Abzuglinie an Abzuglinieclip. • Fixe o colhedor ao grampo do colhedor. • Assicuri la cordicella alla clip della cordicella. 11 10 Complete all wiring connections (coax wire not supplied). • Termine todas las conexiones del cableado (alambre coaxil no suministrado). • Accomplissez tous les raccordements de câblage (fil coaxial non fourni).
PAGE 8
13 Secure with ¼” Allen wrench. • Asegure con la llave Allen del ¼”. • Fixez clé Allen avec de ¼”. • Sichern Sie mit ¼“ Inbusschlüssel. • Fixe com chave Allen do ¼ de”. • Fissi con chiave di Allen del ¼”. 14 ! To loosen - unscrew bolts ½” turn counter clockwise. • Para aflojar - desatornille a la derecha contrario de la vuelta del ½ de los pernos”. • Pour se desserrer - dans le sens des aiguilles d'une montre de tour dévissez de boulons ½ » contre-.
PAGE 9
17 Attach base plate to ceiling plate with hardware provided with camera 18 Attach main connector and install camera to base plate. Secure locking pins • El embase de la fijación a la placa del techo con hardware proporcionó la cámara • Ate el conectador principal e instale la cámara al embase. Asegure las clavijas de cierre • L'embase d'attache au plat de plafond avec le matériel a fourni en appareil-photo • Attachez le connecteur principal et installez l'appareil-photo sur l'embase.
PAGE 10
21 22 Twist on the camera clockwise to the mounting plate. Attach safety lanyard and secure camera with set screw. • Tuerza en la cámara a la derecha a la pletina. • Ate el acollador de la seguridad y asegure la cámara con el tornillo de presión. • Tordez sur l'appareil-photo dans le sens des aiguilles d'une montre au plat de support. • Verdrehen Sie sich auf der Kamera nach rechts zur Montageplatte. • Torça na câmera no sentido horário à placa de montagem.
PAGE 11
24 1” spacers + (4) ½” spacers (4) corner bosses. LED • 1” espaciadores + (4) jefes de la esquina de los espaciadores del ½” (4). Reset Button • 1 » entretoises + (4) patrons faisants le coin des entretoises de ½ » (4). • 1“ Distanzscheiben + (4) ½“ Eckchefs der Distanzscheiben (4). • saliências de canto dos espaçadores de 1” espaçadores + (4) ½” 4). • i distanziatori del 1„ distanziatori + (4) ½„ (4) sporgenze d'angolo. Network to Camera 25 To maximize power for heater hold reset 1 sec.
PAGE 12
26 27 Before Tab After Loop the lanyard around the tab inside the housing. Align the arrows on the outside of the dome and lock. • Coloque el acollador alrededor de la lengüeta dentro de la cubierta. • Faites une boucle la lanière autour de l'étiquette à l'intérieur du logement. • Schlingen Sie die Abzuglinie um den Vorsprung innerhalb des Gehäuses. • Dê laços no colhedor em torno da aba dentro da carcaça. • Colleghi la cordicella in circuito intorno alla linguetta all'interno dell'alloggiamento.
PAGE 13
PB24 Addendum Additional wires are provided to run power to PB24. Use with connector supplied. Run RJ45 connector through PB24, wall mount, and connect lead from housing. • Los alambres adicionales se proporcionan a la energía funcionada con a PB24. El uso con el conectador proveyó. Funcione con el conectador RJ45 con PB24, emparede el montaje, y conecte el plomo de la cubierta. • Des fils additionnels sont fournis à la puissance courue à PB24. L'utilisation avec le connecteur a fourni.
PAGE 14
Replacement Parts List FDW75 14 15 16 13 12 11 10 9 8 7 5 6 4 3 1 2 1 1A 2 3 4 5 5A 6 7 8 9 10 11 12 13 14 15 16 N/S N/S N/S PART NUMBER FD7C FD7T RPFD7501 RPFD703 RPNET02 RPFD072 RPFD072/12 RPFD080 RP3510 RP76VL2008 RPFD040 RPFD2612 RPFD3245 RPGK3356 RP3458 RP3551 RP3606 RP3719 RPPKH2098 RPPKE1100 RPTRAN02 DESCRIPTION CLEAR REPLACEMENT CAPSULE TINTED REPLACEMENT CAPSULE LOWER TRIM RING DOME CLAMPING RING NETWORK HGS POWER SUPPLY 24V HEATER 12V HEATER (12VDC MODELS ONLY) BLOWER CAMERA BRACKET
PAGE 15
Product Registration/Warranty Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest quality products available and superior customer service. Should a problem arise, rest assure that Moog Videolarm stands behind its products by offering impressive warranty plans: 3 Years on all Housings, Poles, Power Supplies, and Accessories and 5 Years on camera systems (SView, QView, Warriors), and InfraRed Illuminators.