Installation and Operation Instructions Before attempting to connect or operate this product, please read these instructions completely. PB26LG Aluminum City-Wide Surveillance Wireless Communication Power Solution PB26LG.......... Liberty Series wireless power box that includes a cellular router and power supply. 110/220VAC input. Designed to work with Moog IP Ready Series of IP camera housings Moog Inc. Sensor and Surveillance Systems © 2013, Moog Inc.
IMPORTANT SAFEGUARDS 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with damp cloth. 7 Do not block any of the ventilation openings. Install in accordance with the CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN manufacturers instructions. 8 9 SAFETY PRECAUTIONS Cable Runs- All cable runs must be within permissible distance.
Product Warranty Registration Register Your Products Online www.moogS3.com/technical-support/product-registration Moog values your patronage. We are solely committed to providing you with the highest quality products and superior customer service. With 3-Year and 5-Year warranties (depending on the product purchased) we stand behind every product we sell. See full warranty details at www.moogS3.
Limited Warranty for Moog Products Moog - Decatur Operations, subsequently referred to as “Manufacturer,” warrants these products to be free from defects in material or workmanship as follows: PRODUCT CATEGORY PARTS \ LABOR All Enclosures and Electronics Five (5) Years Accessory Brackets Five (5) Years Controllers Three (3) Years Power Supplies / IR Illuminators Three (3) Years Poles / PolEvators / CamEvator Three (3) Years Warrior Series™ / Q-View™ Three (3) Years ™ Three (3) Years 6 months
Electrical Specifications PB26LG English Input Power: 110 VAC/220VAC 1A/.5A Power Consumption: 1Amp (120 Watts) at 120 VAC Power Output: 96 VA at 24 VAC 52 Watts Heater/Blower 32 Watts Camera Power An all pole main switch with a contact of at least 3mm in each pole shall be incorporated in the electrical installation of the building. Tools Required: .150” Flathead Screwdriver 7/16 Wrench or Socket 9/16 Wrench or Socket Español Energía De Entrada: 110 Consumo De Energía de VAC/220VAC 1A/.
Power Feed Locations: Pendant mount location Liquid tight strain relief for main power Liquid tight plug for optional power / antenna Liquid tight modem cover 3G - 4G units Liquid tight security latch
WALL MOUNTING 1 Attach unit securely with (4) ⅜” bolts. • Ate la unidad con seguridad con (4) pernos del ⅜ los”. • Attachez l'unité solidement avec (4) boulons de ⅜ des ». • Bringen Sie Maßeinheit sicher mit (4) ⅜“ Schraubbolzen an. • Una a unidade firmemente com (4) parafusos do ⅜”. • Attacchi saldamente l'unità con (4) bulloni del ⅜„. 3 POLE MOUNTING 2 Step One: Attach the pole clips to the mounting tabs as shown. Use hardware provided.
PENDANT MOUNTING 5 Wall Mount Gasket 6 Conduit Fittings The wall mount bracket must be attached using the gasket as shown. This is the assembled unit with the housing and conduit. • El soporte del montaje de la pared se debe atar usando la junta como se muestra. • La parenthèse de bâti de mur doit être attachée utilisant la garniture comme montrée. • Der Wandeinfassungshaltewinkel muss unter Verwendung der Dichtung wie gezeigt angebracht werden.
8 Remove barrier cover. • Quite la cubierta de la barrera. • Enlevez la couverture de barrière. • Entfernen Sie Sperrenabdeckung. • Remova a tampa da barreira. • Rimuova la copertura della barriera. o della vista dell'unità. Remove barrier cover 9 ON/OFF switch (will not turn off wireless circuit) 1. Move the 115//240VAC selector switch (3) to the desired position 2. Insure that the ON/OFF switch (2) is in the off position 3. Attach the in coming “main” power to the 120/240 VAC input 4.
3G/4G Camera Prep 10 11 Assign your camera the static TCP/IP address of 192.168.1.50 with a subnet mask of 255.255.255.0 and a gateway of 192.168.1.1. Connect to your camera with a laptop or pc • Conecte con su cámara con un ordenador portátil o una PC. • Reliez à votre appareil-photo à un ordinateur portable ou à un PC. • Schließen Sie an Ihre Kamera an einen Laptop oder an einen PC an. • Conecte a sua câmera com um portátil ou um PC.
14 Some users may require WiFi access to the unit as well. Connect to the WiFi network by selecting the SSID that contains the word Videolarm and a combination of three letters and numbers. An example is Videolarm2A0 as shown above. The encryption key for the network is password. • • • • • Algunos usuarios pueden requerir el acceso de WiFi a la unidad también. Conecte con la red de WiFi seleccionando el SSID que contiene la palabra Videolarm y una combinación de tres letras y números.
SUPPORT FOR 3G/4G CARDS: The PB26LG can support cards up to 5.25” x 1.45” x .5” ( L x W x D ) in size. Some cards may have intermittent service operating at temperatures above (122°F). 17 MODEM - INSTALL Use the provided velcro to mount and secure the USB modem. • Utilice el Velcro proporcionado para montar y para asegurar el módem del USB. • Employez le Velcro fourni pour monter et fixer le modem d'USB. • Benutzen Sie den zur Verfügung gestellten Flausch, um das USB-Modem anzubringen und zu sichern.
19 INPUT FOR CAMERA 24VAC POWER FOR CAAMERA AND HOUSING 120VAC INPUT ALARM INPUT FOR IP RESET 20 21 Connect down and camera power to this connector green wire and yellow wire are for housing heater and blower. Red/black and orange/black are for camera power. Because it is 24VAC. It is not polarity sensative. • Conecte abajo y la energía de la cámara a este alambre del verde del conectador y al alambre amarillo está para el calentador y el soplador de la cubierta.
22 Connect network camera to network cable. • Conecte la cámara de red con el cable de la red. • Reliez l'appareil-photo de réseau au câble de réseau. • Schließen Sie Netzkamera an Netzkabel an. • Conecte a câmera de rede ao cabo da rede. • Colleghi la macchina fotografica di rete al cavo della rete. WAN INPUT LAN INPUT LAN INPUT LAN INPUT 23 IP RESET ALARM WIRES Connect appropriate alarm output of the camera to the IP Reset alarm input wires.
Replacement Parts PB26LG Liberty Series 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART # RP30VL3744 RP30VL2742 RP30VL3740 RP70TRANS12 RP30VL3737 RP70LF3VR3 RPSPPA405 RP110IPR01 RP76VL2007 RP70VL3727 RP76RCNEX1 RP71BLEH220 RP30VL3736 RP96GK3745 RP30VL3742 RPPB26PLUG RP94FSSR04 RPPBLOCK DESCRIPTION PB26LG POWER BOX POLE MOUNT CLIPS ELECTRONICS MOUNTING PLATE TRANSFORMER, 96 VA SURGE BRACKET 120/240V 50-60 Hz LINE FILTER 15A PARALLEL SURGE PROTECTOR IP RESET 4G POWER AND CONNECTION BOARD ASSEMBLY BOARD