User`s manual
MP-201 User’s Manual
Page 40
MP-201 User’s Manual
Page 41
DESCRIPTION:
The rst Utilities menu displays the current version number of the operating system as
shown. Rotate the VALUE encoder to advance through the Utility menus.
CV SMOOTH allows you to turn the Control Voltage Smoothing function ON and OFF.
This function works to smooth the LFO wave, and is especially effective when the LFO
RATE is set to very high frequencies.
CV SCALE allows you to set the output Control Voltages to Bipolar (-5V to +5V) or
Unipolar (0 - +5V) levels.
COPY PRESETS allows you to copy a Preset from one location to another.
To perform this function, press ENTER to get the submenu shown, then use the VALUE
encoder to choose the desired Preset you wish to copy. Press the Encoder pushswitch
to move the cursor to the bottom line and use the VALUE encoder to choose the
desired destination location. Press ENTER to make the copy.
SWAP PRESETS allows you to swap the locations of any two Presets.
To perform this function, press ENTER to get the submenu shown, then use the VALUE
encoder to choose the desired Preset on the top line of the display. Press the Encoder
pushswitch to move the cursor to the bottom line and use the VALUE encoder to
choose the second desired Preset. Press ENTER to make the swap.
The MIDI SETUP function allows you to congure the MIDI routing for MIDI IN, OUT
and MERGE (USB and DIN), and congure PROGRAM CHANGE options via MIDI.
There are ve MIDI routing menus: MIDI IN, MIDI OUT, USB MERGE, DIN MERGE and
PROGRAM CHANGE.
To change the MIDI Setup, press ENTER to get the submenu shown, then use the
VALUE encoder to choose the desired routing port at the top of the display (MIDI IN
is the rst routing option). Press the Encoder pushswitch to move the cursor to the
bottom line, then use the VALUE encoder to choose the desired routing path. Press
the Encoder pushswitch to move the cursor back to the top line if you wish to change
additional MIDI routings. When complete, press EDIT to escape.