User manual

ManualsBrandsMoog ManualsWater PumpRKP-II

1 General Information Warranty and Liability

1.5 Warranty and Liability

In principle, our general terms and conditions for delivery and payment apply.

These shall be available to the buyer at the latest at the time the sales contract

is completed.

Limits to Warranty and

Liability

Among other things, warranty and liability claims are excluded for personal

injury or property damage should they be the result of one or more of the

following causes:

• Work performed with and to the radial piston pump or handling the radial

piston pump by users not qualified for the job

Ö Chap. "2.2.2 Selecting and Qualifying Staff", Page 8

• Use in violation with regulations

Ö Chap. "2.1 Intended Use", Page 7

• Unsafe operation

Ö Chap. "2.2.1 Safe Operation", Page 8

• Failing to take required work safety measures for the respective

application

Ö Chap. "2.2.4 Work Safety", Page 9

• Not adhering to the instructions in User Manual at hand or to the relevant

supplemental documentation for the respective application

• Non-observance of the relevant manufacturer's safety standards and

those of the operator of the machinery for each respective application

• Non-observance of the relevant regulations applicable nationally and

internationally, or standards and directives (such as, e. g., EU Machine

Directive and the regulations by the Employer's Liability Association, TÜV

or VDE) as amended in their current version when designing, assembling

and operating the machinery with all of the installed components.

• Failure to install a suitable safety system for limiting the pressure in the

hydraulic connections

Ö Chap. "2.3.2.1 Safety Devices for Limiting Pressure", Page 10

• Using radial piston pumps that are not in technically flawless condition or

not safe for operation

• Unauthorized or improperly performed modifications to the design or

repairs and maintenance work

Ö Chap. "2.2.3 Structural Modifications", Page 9

Ö Chap. "8 Maintenance and Repairs", Page 53

• Not adhering to the inspection and maintenance instructions from the

manufacturer and the operator of the machinery.

• Not adhering to all technical data during storage, transport, assembly,

disassembly, connecting, start-up, configuring, operating, cleaning,

repairing or resolving any possible failures, especially to the ambient

conditions as well as to the data of the hydraulic fluid in use.

Ö Chap. "4 Technical Data", Page 27

• Improper storage, transport, assembly, disassembly, connection, start-up,

configuration, operation, cleaning, repairing, resolving any possible

failures or disposal

• Use of unsuitable or defective accessories or rather unsuitable or

defective spare parts

Ö Chap. "10 Spare Parts, Accessories, Repairs", Page 57

• Catastrophic events beyond our control or acts of God