Specifications

FILTER AMT: Specifies the maximum amount of modulation sent to the Filter Cutoff when
the Mod Wheel is engaged. Page 21
WAVE AMT: Specifies the maximum amount of modulation sent to the Oscillator’s Waveform
when the Mod Wheel is engaged. Page 21
MODULATION SHIFT MODE PARAMETERS
LFO RANGE: Selects the frequency range at which the LFO operates. Select between Low
(0.01 to 10Hz), Medium (0.1 to 100Hz), or High (1 to 1000Hz) ranges. Page 28
WAVE MOD DESTINATION: Determines whether the waveform of Oscillator 1, Oscillator 2,
or
both are modulated when WAVE AMT is engaged. Page 28
LFO KB AMT: Specifies how much the LFO rate follows the keyboard pitch, from 0 - 2:1.
Page 29
LFO GATE RESET: Resets the LFO to its start phase with each new note played. Page 25
MIDI SYNC : Synchronizes the LFO rate to a **clock division of the incoming MIDI beat clock.
If no clock is present, the LFO runs at the selected rate. Default is on. Page 29
** See page 38 for LFO clock divisions.