Specifications

Page 20
Taurus 3 User’s Manual - The Components
Page 21
Taurus 3 User’s Manual - The Components
During the bank selection process, the LCD will display the currently selected bank and preset location:
NOTE: When selecting Banks using the footwheels, the LCD becomes a non-editable display.
You cannot select the Bank or Preset using the VALUE encoder in this mode.
To change the bank, simply press a footpedal. For example, pressing the C# footpedal will select bank B:
After making a bank selection, press the BANK footswitch again to load the new preset (in this example,
‘B2’) and the Bank LED will stop ashing. The LCD will now display the Preset at location B2:
As an alternate method, while the Bank LED is ashing, you can press any of the four Preset footswitches
to immediately switch to the chosen preset within the selected bank without having to press the BANK
footswitch a second time. For example, suppose you have just selected bank D (footpedal D#):
If you now press Preset footswitch #3, the Taurus will immediately switch to Preset D3. The Bank LED will
stop ashing and the LCD will display the new Preset:
NOTE: If you press the BANK footswitch by mistake, pressing it a second time will cancel
the Bank Selection function.