Specifications

EXAMPLE 2: Interface a Taurus II with a Moog Liberation.
Taurus II would be the slave, the Liberation the master or controller.
Reason for interface: to use the synthesizer module as an expander unit for the Liberation.
AUDIO
OUT
o
MOOG TAURUS II
MOOG LIBERATION
AUDIO
IN
TRIG
IN/OUT
KEYBOARD
IN/OUT
-UNBALANCED
USE STEREO PLUG ONLY
The Liberation's control voltage output must be scaled and ranged. Scaling makes sure intervals are correct
on both instruments and ranging ensures unisons are correct. The proper procedure is as follows:
1. Check that the Taurus II is in tune with Liberation.
2. Make all interface connections.
3. Set volume of Taurus II and Liberation so you can hear both instruments clearly.
4. Depress top C on Liberation and adjust range until Taurus II is in tune with Liberation (zero beats).
5. Play low F on Liberation and adjust scale so both instruments are in tune (zero beats).
6. Repeat steps 4 and 5 until perfect tuning is obtained.
The two interface controls contain all control voltages necessary for performance. The voltages for the ribbon, force sensor,
modulation and keyboard are all summed together, so the slave instrument now becomes as versatile as Liberation.
41