User`s manual

Quick Reference Guide
Keys and Controls
All of the new functions can be accessed by the orange buttons with
one exception: The MIDI channel select has been incorporated into the
incremental controller. This was done because there are seventeen
parameters, 1-16 for channels and 0 for Omni On. The other new
features are single or double press parameters. They are all accessed
as LEVEL 2 parameters.
SINGLE PRESS PARAMETERS
To Toggle Between Internal Clock and MIDI Clock
Press [LEVEL 2]
Press [2]
To Manually Disable The Octave Buttons For Octave Enable
Press [LEVEL 2]
Press [6]
To Select A New Bank
Press and hold [LEVEL 1]
While holding, you will see the current bank displayed in the edit LEDs
- Now select a bank by pressing one of the 16 orange program
buttons. You will see the new bank number when you release the
program button.
DOUBLE PRESS PARAMETERS
To Select A Different MIDI Clock Per Quarter Note (PPQ):
Press [LEVEL 2]
Press [5] You will see the current pulses per quarter note displayed
in the edit LEDs.
- Now press one of the first four orange buttons to select 3, 6, 12, or
24 PPQ respectively.
(NOTE: You must press an orange button after pressing [5]. The
SOURCE will not let you get out of this mode until you complete the
sequence).