User`s manual

WHAT'S NEW
Expanded Memory
The memory of the SOURCE has been expanded in such a way that it
is no longer necessary to use the cassette save functions. Instead, the
SOURCE now has 256 patch (program) locations to which sounds may
be saved. This has been accomplished through the use of banks.
Currently there are sixteen banks of sixteen patches. To select a
program, first select a bank. Once a bank is chosen then chose a
patch (1-16) within the bank. (Selection of the patch is done as usual).
The edit buffer (the sound currently playing) can also be saved to any
of the 256 patch locations. To save the edit buffer to a different bank,
first select the desired bank, then save the patch in the same way as
usual
MIDI Messages
Now your SOURCE is able to respond to MIDI messages.
Specifically, this includes the Note on and off, Pitch Bend, Program
Change, Bank Select, Timing Clock, Start, Stop, Continue and
System Exclusive commands. In essence, your SOURCE is now able
to communicate with your other instruments.
ARPEGGIATOR CLOCK
The arpeggiator is now capable of being clocked from MIDI. If the
MIDI clock stops, (i.e. a cable pulled out) the SOURCE will revert
back to the internal clock. Once the MIDI clock is restored, the
SOURCE will sync back to the MIDI clock. However, it will not be
completely in sync until a stop command followed by a start
command is received. If the clock source is set to internal (LEVEL 2/
BUTTON 2), the SOURCE will ignore the MIDI clock, start, stop and
continue commands.