Operating instructions

Adding Multiple PB24M Series Devices to a Wireless Network
5
By default each PB24M Series is congured with the
IP address of 192.168.1.100. If there is more than one
PB24M58 on the wireless network, then you will need to
change the default IP addresses on each additional device.
For example Unit 1 could retain the default IP address of
192.168.1.100. Unit 2 would need to have its address
changed, so it could have 192.168.1.101 assigned to the
Network Conguration. Unit 3 could have addresses of
192.168.1.102, and so on for each additional device.
NOTE – When conguring multiple PB24M Series devices
for the rst time, make sure that only one device is
powered on at a time. Powering on two devices with a
default conguration will cause IP address conicts on
a network since each of the devices will have the same
addresses assigned to their interfaces.
PB24M58 IP CONFIGURATION
Changing the Default SSID
5.1
The default SSID for the PB24M58 is Videolarm. If the SSID needs to be changed from the default, then the SSID
must be changed on ALL wireless devices in the network on all VLRM58 and PB24M58 devices.