User Guide

E. MAIN OUTPUT
The Voyager has two audio outputs. There is a VCA for each output, which allows
for stereo effects such as Panning or the Dual lowpass filtering. The main control for
the Volume is the Master Volume Control. The Volume Envelope modulates the
output VCAs. When only one output is desired, the two output VCAs are mixed to the
left output.
LEFT/MONO and RIGHT OUTPUTS:
These are the audio outputs that are on the back panel. They are both ¼”
unbalanced outputs. When only the left audio output has a plug inserted into it,
both the left and right signals are summed to that jack in mono.
MASTER VOLUME:
This is the main Volume control. Full-clockwise is maximum output, full-
counterclockwise silences the Voyager.
VOLUME CONTROL INPUT:
Accepts a 0 to 5 V control voltage or an Expression pedal, such as the EP-1 with
the ring connection supplying 5 Volts to the Pedal and 0 to 5 Volts control voltage
return to the Voyager on the tip connection. The Master Volume sets the maximum
output level, and as the Volume CV input drops below 5 volts, the output is
reduced.
PAN INPUT:
A –2.5 to 2.5 V control voltage applied to this jack will cause the output signal to
pan from left to right.