User Guide

J. THE BACK PANEL
The Back Panel is loaded with Jacks. In addition to the Audio Outputs, there are
a multitude of CV and gate inputs, the MIDI connectors, a BNC outlet for a
gooseneck lamp, the accessory port, and the power connector.
POWER CONNECTOR:
This is a standard AC power inlet, Use only a power cord designed to mate with
this receptacle. The Voyager power supply is designed to work with power inputs
of 100-240 VAC.
DANGER – Do not alter this connector in any way. Doing so can result in the
risk of shock, injury or death.
Be familiar with the safety instructions printed at the beginning of this manual.
If the connector should be damaged, refer servicing to qualified personnel
only.
MIDI CONNECTORS:
These are connectors for MIDI in, out and thru.
BNC LAMP CONNECTOR:
This is a 12 VDC BNC outlet for a gooseneck lamp.
CV/EXPRESSION and GATE/FOOTSWITCH INPUTS:
The CV/ Expression inputs are color coded with red nut. These jacks accept an
input from an expression pedal such as the EP-1, or a CV from –5 to +5 Volts. The
Gate/Footswitch Inputs are color coded with blue nuts. All Gate inputs accept
footswitches except the Sample and Hold Gate Input. It accepts only a +5 Volt
Gate Signal.
ACCESSORY PORT:
This is designed for accessories from Moog Music – The VX-351 Voyager CV
Expander It contains the output of the analog gates and CVs from the Voyager.
With the VX-351, the Voyager becomes more like a modular synth.
Appendix E contains the user’s manual for the VX-351.