User Guide

internally generated MIDI messages. When sequencing, this function should be turned
off to prevent “double triggering” caused by a MIDI loop.
1.4 MIDI PRG. CHANGE
Program Change Receive On/Off. This enables or disables the Voyager’s reception
of MIDI program changes. When this is off, only the +/- 1 buttons change the Voyager’s
presets.
2.1 MIDI IN CHANNEL
When this is selected, use the +1/ -1 buttons to select the MIDI Channel that the
Voyager recognizes. The Voyager only responds to one channel at a time.
The choices are 1-16
2.2 MIDI OUT CHANNEL
When this is selected, use the +1/ -1 buttons to select the MIDI Channel that the
Voyager uses to send Data. The Voyager sends MIDI on one channel at a time.
The choices are 1-16.
2.3 MIDI IN ON/OFF
This turns On or Off the MIDI Input. To use, select MIDI In On/Off and press ENTER. The
screen will prompt: “Switch ON the MIDI In function? Yes/No”. Use CURSOR to select “Yes”
to turn on the MIDI input and “No” to turn Off the MIDI input, then Press ENTER.
2.4 MIDI OUT ON/OFF
This turns On or Off the MIDI Output. To use, select MIDI Out On/Off and press ENTER.
The screen will prompt: “Switch ON the MIDI Out function? Yes/No”. Use CURSOR to
select “Yes” to turn on the MIDI Output and “No” to turn Off the MIDI Output, then Press
ENTER.
3.1 SEND PANEL SOUND
For outputting single presets as a SysEx file. This function allows the export of a single
preset from the Voyager’s bank of presets. The Voyager also has the ability to import a
single preset in PANEL mode. This allows the Voyager
user to build up custom preset
banks. This requires another Voyager, or a computer with a MIDI interface and a
program that can accept a manual Sysex dump. You must enable the device that is to
receive the Sysex data. Once the remote device is enabled, press ENTER to start the
data transfer.
3.2 SEND ALL PRESETS
This is a utility to send Sysex (System Exclusive) data for archiving the bank of 128
presets in the Voyager’s memory. This requires another Voyager, or a computer with a
MIDI interface and a program that can accept a manual Sysex dump. You must
enable the device that is to receive the Sysex data. Once the remote device is
enabled, press ENTER to start the data transfer.
3.3 RECEIVE PRESETS
This is a utility to import Sysex data for a bank of Voyager presets. This requires
another Voyager, or a computer with a MIDI interface, a program that can send a
Sysex bank, and a bank of Voyager presets. The Voyager must be enabled to receive
the presets. When entered, the screen will prompt the user: “Sysex enabled”. At this
time, a Sysex transfer from a remote device can be started. To disable the ability to
receive Sysex, press the –1 button, or press ENTER to return to the MASTER menu. This