User Guide

The “Clock Divider” function restores the default settings for the clock divider
parameter stored in the presets. The default value is “24”, which is an 8
th
note (half a
beat). To restore the clock divider values to their defaults, select the function “Clock
Divider” and press ENTER. The screen will prompt: “Reset the Clock Divider Values of
all Preset Sounds? Yes/No” Select Yes and press ENTER.
2.2 Pot Mapping
The “Pot Mapping” function restores the default settings for the Pot Mapping
parameters stored in the presets. Select the function “Pot Mapping” and press ENTER.
The screen will prompt: “Reset the Pot Mapping function of all Preset Sounds?
Yes/No”. Select Yes and Press ENTER.
2.3 Env Gates F/A
The “Env Gates F/A” function restores the default settings for the Filter and
Amplitude Envelope Gates parameters stored in the presets. The default is “ENV
Gate Input”. To restore the default Envelope gate settings, select the function “Env.
Gates F/A” and press ENTER. The Screen will prompt: “Reset the Env Gates
Filter/Amplitude for all Preset Sounds? Yes/No” Select Yes and press ENTER.
2.4 Power-On Screen
The “Power-On Screen” functions allows the user to select the original Voyager
power on logo, or the new version 2.0 power on logo. There is no difference in
performance, but the new Power-On screen displays the Moog logo and the
software version. To change the appearance of the Power on screen, select
“Power-On Screen” and press ENTER. The screen prompts: “ Get the old Power-ON-
Logo on the display screen? Yes/No”. Select “No” and press ENTER.
5.1 SOFTWARE VERSION
Displays the current System ROM version and date of the release.
5.2 SEND SYSTEM ROM
This utility allows you to back up your operating system via Sysex data. This screen
displays the prompt: “Press Enter to send Prog Data”. The boot software version will be
displayed on the bottom line. Before you press enter, be sure the remote device is
enabled to receive the data. Pressing ENTER will start the export. We recommend
backing up the operating system before upgrading to a new version of software.
5.3 SEND BOOT SYSTEM
This utility allows you to back up your boot software via Sysex data. This screen
displays the prompt: “Press Enter to send Boot Data”. The boot software version will be
displayed on the bottom line. Before you press enter, be sure the remote device is
enabled to receive the data. Pressing ENTER will start the export.
5.4 RECEIVE UPDATE
This utility is used to upgrade the system software. Updates will be available from
time to time on our website, www.moogmusic.com in Minimoog Voyager section,
entitled “software”. Instructions for upgrading the software are provided with the files –
you must follow these instructions! To take advantage of this feature requires the
following:
- A computer with internet access and MIDI interface.