User Guide

3. EDIT Mode

EDIT Mode is used to determine parameters of a preset not accessible through the

front panel and to name and save presets. EDIT mode is entered by pressing the EDIT

button. When this is done, a list appears that displays the different options. Using the +1

or –1 buttons moves the cursor to highlight a new line. There are four items per page,

and 6 pages. The page number and item number are displayed in the EDIT menu. The

Options in EDIT mode are:

1.1 Compare to Preset

1.2 Recall last Sound

1.3 Real Panel Contr.

1.4 Pitch Bend Amt.

2.1 PGM M-Whl. Source

2.2 PGM M-Whl. Dest.

2.3 PGM Pedal Source

2.4 PGM Pedal Dest.

3.1 PGM Shaping 1 SRC

3.2 PGM Shaping 2 SRC

3.3 Keyboard Modes

3.4 Trigger Modes

4.1 Fil. A Pole Sel.

4.2 Fil. B Pole Sel.

4.3 Fil. ENV Gate SRC

4.4 Amp. ENV Gate SRC

5.1 T.S. Destinations

5.2 T.S. Mem. Mod Bus

5.3 T.S. Mem Global

5.4 Pot Mapping S/D

6.1 LFO Clock Divider

6.2 Init. Parameters

6.3 Preset Name

6.4 Save Preset

1.1 COMPARE TO PRESET

The “COMPARE TO PRESET” function in EDIT mode can be used to compare the

current Panel sound to any other preset in the Voyager’s Preset bank. Applications for

this include comparing an edited version of a sound to its original version in memory, or

to find a preset location that you do not use, where you can store your current Panel

Sound. To use this function, select “Compare to Preset” and press ENTER. The screen

prompts: “Cursor toggles between Panel sound and Preset. PanelÅ Æ Preset. Pre-set #

001”. Note that the sound that is currently heard when the Voyager is played is

highlighted. The CURSOR button is used to change between the panel sound, and a

preset. The Preset number can be changed with the +/- buttons.

1.2 RECALL LAST SOUND:

RECALL LAST SOUND is a function that returns to a previously edited version of a sound.

This is used in conjunction with PANEL Mode. If you are in PANEL Mode and make

changes to a preset and then press ENTER, the sound reverts to the original saved

settings. If you want to get back your tweaks, Press the EDIT button to enter EDIT mode –