User Guide

RECALL will be highlighted. Press ENTER, and the display will prompt “Recall the last
edited sound? Yes/No”. Use the cursor button to select Yes and press ENTER. You will
now hear the changes you made to the preset. At this point if you want to keep those
changes, you can save the preset. RECALL can also be used to return to a preset
sound after the parameters are initialized (INIT. PARAMETERS or REAL PANEL CONTROL
see below).
1.3 REAL PANEL CONTR.:
REAL PANEL CONTROL is a function that enables the operation of the Voyager from
the front panel. To use this function, enter EDIT MODE by pressing the EDIT button. Press
the +1 key to highlight REAL PANEL CONT. and press ENTER. The screen prompts: “Load
the actual Panel Parameters Yes/No?” Use the CURSOR button to select Yes and press
ENTER. The sound produced when the keyboard is played is now determined by the
settings of the front panel controls.
1.4 PITCH BEND AMT.:
PITCH BEND AMOUNT allows the user to set a pitch bend range for each preset.
Highlight the PITCH BEND AMT. function in the EDIT Menu and press ENTER.
Use the +/- 1 buttons to select the desired range for the pitch bend wheel.
The options are:
Off
+/- 2 Semitones
+/- Minor Third
+/- Major Third
+/- Fourth (default)
+/- Fifth
+/- 1 Octave
+/- 1 Octave & 5
th
+/- 2 Octaves
+/- 2 Octaves & 5
th
Pre. –Value
Pre. –Value is a user defined Pitch Bend Amount. The value of this is set with the
External Audio Input control. Simply push the Pitch Bend Wheel forward and listen to the
pitch change as you rotate the External Audio Input control – stop when the desired
interval between full pitch bend and no pitch bend is reached.
2.1 PGM M-WHL SOURCE
PROGRAMMABLE MOD WHEEL SOURCE is a function that allows the user to program 1
of 8 additional modulation sources to be used when the SOURCE switch for the Mod
Wheel Mod Bus is set to NOISE/PGM. Enter EDIT mode, and use the +1 button to
highlight PGM M-WHL SOURCE. Press ENTER and the following Mod Sources appear:
Noise (default)
Filter ENV
Amplitude ENV
Smoothed Sample and Hold
Oscillator 1
Oscillator 2
Touch Surface X
Touch Surface Y
2.2 PGM M-WHL DEST.