User Guide

− Gate is OFF
5.1 T.S. DESTINATION
Touch Surface Destination. Highlighting this item and pressing ENTER accesses a
menu that shows the different outputs of the Touch surface: X, Y, A, Gate. The screen
looks like this:
Touch Surface X
Touch Surface Y
Touch Surface A
Touch Surface Gate
Use the +/- 1 button and selecting an output, then press ENTER. The display shows
something like this:
Dest: Fil Cutoff
MIDI Ctrl. No. 19
Direction: Normal
TS-X Amount: 100%
The parameters for each touch surface axis are: touch surface destination, the MIDI CC
being transmitted, the direction of control, and the amount (for X,Y, and A only). To get
back to the Touch Surface menu, press ENTER. To return to the Edit Menu then press
CURSOR or EDIT.
DEST.: Voyager users can choose one of 32 destinations for the Voyager’s touch
surface outputs X, Y and A, and 14 destinations are available for the touch
surface gate. Here is a list of the destinations:
X, Y, and A
− LFO rate
− glide rate
− mod wheel mod bus amount
− volume
− pedal/on mod bus amount
− osc 1 waveform
− osc 2 frequency
− osc 2 waveform
− osc 3 frequency
− osc 3 waveform
− external audio in level
− osc 1 level
− osc 2 level
− osc 3 level
− noise level
− filter cutoff
− filter spacing
− filter resonance
− filter KB amount
− filter attack
− filter decay
− filter sustain
− filter release
− filter envelope amount