User`s manual

Page 50
Voyager XL User’s Manual - EDIT Mode
Page 51
Voyager XL User’s Manual - EDIT Mode
Here are the Edit Mode functions:
1.1 COMPARE TO PRESET
The COMPARE TO PRESET function is used to compare the current Panel
sound to any other preset in the current Preset bank. Applications for this
include comparing an edited version of a sound to its original version in
memory, or to nd a preset location that you do not use where you can
store your current Panel Sound. The sound that is currently heard when
the Voyager is played is the one highlighted on the ‘Compare’ screen. The
CURSOR button is used to change between the panel sound and a preset.
The Preset number can be changed with the - 1/+1 buttons, but only
presets in the current bank can be selected.
1.2 RECALL LAST SOUND:
The RECALL LAST SOUND function can be used to return to a previously
edited version of a sound. This is used in conjunction with Panel Mode.
If you are in Panel Mode and make changes to a preset and then press
ENTER, the sound reverts to the original saved settings. If you want to
get back to your edited sound, press the EDIT button and select the
‘RECALL LAST SOUND’ function. Use the CURSOR to select ‘YES’ and
press ENTER. You will now hear the changes you made to the preset. If
you wish to keep those changes, you must save the preset. See Edit Mode
function 6.4 ‘SAVE PRESET’ for more information.
1.3 INIT. PARAMETERS (Initialize Parameters)
The INIT PARAMETERS function allows you to reset the current values of
the Voyager’s parameters to a single oscillator basic sound which can then
be used as a starting point for new sound development. To set the Voyager
parameters to an initialized state, use the CURSOR to select ‘YES’ and
press ENTER. A list of the complete initialization parameters appears in
Appendix B.
If you leave the ‘Compare’ screen by pressing the PANEL button
and do not change the preset, you can still toggle between the panel
sound and preset sound by pressing ENTER for the panel sound and
CURSOR for the preset sound.
The ‘Recall’ function can also be used to return to a preset sound after
the parameters are initialized or REAL PANEL PARAMETERS has been
switched on.