User Guide

The +1/ -1 buttons scroll through the list. The list will wrap around when you scroll past the end.

When a line is highlighted, it can be selected by pressing the ENTER button. Once a line is selected,

the screen displays that option.

Press the MASTER, CURSOR or ENTER button to return to the MASTER Menu.

1.1 MIDI PRG. CHANGE

Program Change Receive On/Off. This enables or disables the Voyager’s reception of MIDI program

changes. When this is off, only the +/- 1 buttons change the Voyager’s presets.

1.2 MIDI CHANNELS

This is used to configure the MIDI In and MIDI Out Channel. When this is selected, use the Cursor

button to select MIDI In or MIDI Out, and use the +1/ -1 buttons to select the MIDI Channel. The

Voyager only transmits or responds on one channel at a time. The choices are 1-16

1.3 MIDI OUT ON/OFF

This turns On or Off the MIDI Output. To use, select MIDI Out On/Off and press ENTER. The screen

will prompt: “Switch ON the MIDI Out function? Yes/No”. Use CURSOR to select “Yes” to turn on the MIDI

Output and “No” to turn Off the MIDI Output, then Press ENTER.

1.4 MIDI MERGE FUNC.

This turns on or off the MIDI Merge. When on, MIDI Merge passes MIDI NoteOn and Note Off

messages that appear at the MIDI In to the MIDI Out. To use, select MIDI Out On/Off and press ENTER.

The screen will prompt: “Select the the MIDI Merge function? Yes/No”. Use CURSOR to select “Yes” to

turn on the MIDI Merge and “No” to turn off the MIDI Merge, then Press ENTER.

2.1 SEND PANEL SOUND

For outputting single presets as a SysEx file. This function allows the export of a single preset from

the Voyager’s bank of presets. The Voyager also has the ability to import a single preset in PANEL

mode. This allows the Voyager user to build up custom preset banks. This requires another Voyager, or

a computer with a MIDI interface and a program that can accept a manual Sysex dump. You must

enable the device that is to receive the Sysex data. Once the remote device is enabled, press ENTER

to start the data transfer.

2.2 SEND PRESET(S)

This is a utility to send Sysex (System Exclusive) data for archiving the bank of 128 presets in the

Voyager’s memory. This requires another Voyager, or a computer with a MIDI interface and a program

that can accept a manual Sysex dump. You must enable the device that is to receive the Sysex data.

Once the remote device is enabled, press ENTER to start the data transfer.

2.3 RECEIVE PRESETS

This is a utility to import Sysex data for a bank of Voyager presets. This requires another Voyager, or

a computer with a MIDI interface, a program that can send a Sysex bank, and a bank of Voyager

presets. The Voyager must be enabled to receive the presets. When entered, the screen will prompt

the user: “Sysex enabled”. At this time, a Sysex transfer from a remote device can be started. To

disable the ability to receive Sysex, press the –1 button, or press ENTER to return to the MASTER menu.

This utility will replace any presets that are in memory, so be sure to back up any presets you want to

save before going through this process.

2.4 SYSEX DEVICE ID

This function can be used in a situation where more than one Voyagers are in a setup. By Changing

the SysEx Device ID, when a Preset Bank is sent, the Device ID byte in that SysEx message matches the

Device ID set in that Voyager. When a SysEx data stream is sent to the Voyagers, only the Voyagers

that have matching Device IDs receive the SysEx messages. This way, when more than one Voyager

is used, and each one has a different SysEx Device ID, Presets or Preset banks can be sent to an