User Guide

39
3. EDIT Mode
EDIT Mode is used to determine parameters of a preset not accessible through the front panel and
to name and save presets. EDIT mode is entered by pressing the EDIT button. When this is done, a list
appears that displays the different options. Using the +1 or –1 buttons moves the cursor to highlight
a new line. There are four items per page, and 6 pages. The page number and item number are
displayed in the EDIT menu. The Options in EDIT mode are:
1.1 Compare to Preset
1.2 Recall last Sound
1.3 Real Panel Param.
1.4 Pitch Bend Amt.
2.1 PGM M-Whl. Source
2.2 PGM M-Whl. Dest.
2.3 PGM Pedal Source
2.4 PGM Pedal Dest.
3.1 PGM Shaping 1 SRC
3.2 PGM Shaping 2 SRC
3.3 Keyboard Modes
3.4 Trigger Modes
4.1 Fil. A Pole Sel.
4.2 Fil. B Pole Sel.
4.3 Fil. ENV Gate SRC
4.4 Amp. ENV Gate SRC
5.1 T.S. Destinations
5.2 T.S. Mem. Mod Bus
5.3 T.S. Mem Global
5.4 Pot Mapping S/D
6.1 LFO Clock Divider
6.2 Init. Parameters
6.3 Preset Name
6.4 Save Preset
1.1 COMPARE TO PRESET
The “COMPARE TO PRESET” function in EDIT mode can be used to compare the current Panel sound
to any other preset in the Voyager’s Preset bank. Applications for this include comparing an edited
version of a sound to its original version in memory, or to find a preset location that you do not use,
where you can store your current Panel Sound. To use this function, select “Compare to Preset” and
press ENTER. The screen prompts: “Cursor toggles between Panel sound and Preset. Panelß à Preset.
Pre-set # 001”. Note that the sound that is currently heard when the Voyager is played is highlighted.
The CURSOR button is used to change between the panel sound, and a preset. The Preset number
can be changed with the +/- buttons.
1.2 RECALL LAST SOUND:
RECALL LAST SOUND is a function that returns to a previously edited version of a sound.
This is used in conjunction with PANEL Mode. If you are in PANEL Mode and make changes to a preset
and then press ENTER, the sound reverts to the original saved settings. If you want to get back your
tweaks, Press the EDIT button to enter EDIT mode – RECALL will be highlighted. Press ENTER, and the
display will prompt “Recall the last edited sound? Yes/No”. Use the cursor button to select Yes and
press ENTER. You will now hear the changes you made to the preset. At this point if you want to keep
those changes, you can save the preset. RECALL can also be used to return to a preset sound after
the parameters are initialized (INIT. PARAMETERS or REAL PANEL CONTROL see below).